Lots of stuff for sale, only selling because I need the money. Prices do not include shipping. Prefer Paypal.
V6 PartsEdelbrock V6 Carburetor Intake Manifold & Adapter
In almost new condition, looks like it only has a few hundred miles on it. Top adapter part has had the outside painted in a high-heat engine primer, lower part is bare aluminum. Needs a new gasket, which is available from Edelbrock. $150
Rebuilt V6 Carburetor Distributor
From ~83 Chevy S10, rebuilt it to work with a carb setup. New pickup coil, cap, and rotor, original GM control module tested and working perfectly, and a $3 brown distributor o-ring from the Chevy dealer. Original weights and springs. The outside housing has had the casting marks removed and has been sanded smooth. Still has the original earlier style coil connector that can be easilly modified to work with a V6 Fiero coil, or the older-style coils. $80
MSD Blaster 2 Coil
New, never used, includes both spark plug wires shown. $40
4 Cylinder Parts84-86 4 cylinder Throttlebody TBI
The original off my car, I bought one from a junkyard, rebuilt it, and installed it, and it worked perfectly, I then bought another rebuild kit and rebuilt this one the same way, and have been keeping it as a spare. Includes TPS and fuel injector. $60
84 Distributor
90% positive I didn't rebuild this, original off my car, so control module works, and could probably use a new pickup coil. Includes cap and rotor. Also includes original coil connector which can be reattached for use with an 84 coil, or you can use the later-style coil connectors to upgrade the coil in your 84, or use it in an 85-86 car. $30
87-88 4 cylinder Throttlebody TBI
Includes a rebuild kit, the TPS, IAC valve, and fuel injector. $50
87-88 control module and crank sensor
As shown, needs some cleaning up, but works, no coils included. $50
[This message has been edited by RWDPLZ (edited 02-28-2013).]
