STILL FOR SALE 4500.00 O.B.O. WITH FACTORY HEADLIGHTS AND WHEELS
NEW PICS ADDED OF UNDERSIDE
Selling my 86GT T-Top V8. NO rust, 4.9 caddy swap done by forum members Mullitproofmonk and Madess. Engine and tranny from 1993 deville w/ 68,000 miles. Car was manual, but converted to auto. Al Lindsey corvette tailight panel. T-Top seals in good shape, DIY Stu's dew wipes, and new GT trunk gasket.
Rick
[This message has been edited by PS87GT (edited 04-10-2012).]
IP: Logged
06:27 PM
PFF
System Bot
PS87GT Member
Posts: 373 From: Moores Hill, IN. USA Registered: Jan 2008
I will include the following with full aking price: ( see pics)
Detmer side skirts---SOLD Ausfiero stg2 six piece kit---SOLD Corvette exhaust tips---SOLD C5 corvette side mirrors Louvered headlight doors---SOLD F1F sharkgill quarter windows---SOLD Custom hood(primer)---sale pending Factory lace wheels(excellent condition)--back on car Gen2 headlight swap kit( working motors, control module, and uncut wiring harness) Synthesis tier3 harness for front battery mount Black dash w/ glove box, guage pod, aux. guage pod, stereo & shift surround, and console---SOLD purchased from Ferrobbi here on the forum.---looking into shipping cost
This would make a nice x-mas gift to yourself!! ho, ho, ho
Rick
[This message has been edited by PS87GT (edited 03-04-2012).]
IP: Logged
06:39 PM
Dec 12th, 2011
PS87GT Member
Posts: 373 From: Moores Hill, IN. USA Registered: Jan 2008
Car is in inside storage for the winter. Also posted on Craigslist. I guess I'll just wait till spring to re-post it for sale here if it doesn't sell!!!!
Rick
IP: Logged
11:27 AM
Dec 26th, 2011
PS87GT Member
Posts: 373 From: Moores Hill, IN. USA Registered: Jan 2008
The car is now $5000.00 O.B.O. That is with factory wheels and headlights back on. All other parts are now for sale if anyone is interested PM with offers.
Rick
IP: Logged
09:58 AM
SC_86_GT Member
Posts: 30 From: Charlotte, NC Registered: Dec 2011
Just to help out, this setup was originally going into my GT before I switched gears and decided to do a 3800sc swap. I sold the setup to David, then Madess and I installed it in this car. I wanted a "weekend swap" that was plug and play so I bought most of the stuff from Ed Park (mounts, harness, axles, chip, tensioner). Also I bought a whole 1993 Cadillac Deville with 68,000 miles as the donor vehicle. I pulled the motor/transmission and scrapped the rest.
Donor vehicle: 93 Cadillac DeVille with 68,000 miles (I pulled motor/transmission ) I bought the whole Cadillac and drove it around the block and up onto the trailer, it was hit in the passenger side
From Ed Parks at The Fiero Factory: Mounts (6 point mount system with no dogbone) 4T60E converted axles Alternator tensioner 1993 Deville programmed ECM Chip Injection Technologies wiring harness
Additional parts that I bought new for the swap: Idler Pulley belt tensioner Trans mount (V6 Fiero front) Trans mount (V6 Fiero rear) Center Engine mount Water pump hose (V6 Fiero) belt (Caddy Alt) Temp Gauge sender - V6 Fiero Oil pressure sender - 88 V6 Fiero Valve Cover Gaskets Thermostat 195F Thermostat Gasket Oil Cooler Plugs
I don't know how many miles were put on the car since we did the swap, but that is the list... I may even have some pictures of the swap in process that I can post if it helps.
Since I have people PM'ing me about the swap, I dug up some pictures of the DeVille that I bought to add here. I will see if I have a couple pictures from during the install. I am happy to answer questions about the install, but Matt and I did it in September 2009 and I haven't seen the car since it pulled out of the driveway.
Funny story, the wife saw me put that in the yard and said "Wow, that is one of the nicer things that you brought home... What's wrong with it?" You can imagine her reaction when she walked around the passenger side of the car. LOL. ------------------ -Brian
