I have the switch on the clutch pedal, the clutch start safety switch(?), but don't have the connector to plug into it as my car was originally an auto. I know a lot of people bypass it so someone is bound to have an extra they don't use or off a parts car. I just need the connector and a couple inches of wire to attach to the rest of my wiring.

Also, I need a 3800 flywheel for my F23 swap, machined or not, I need to get it balanced anyway. Or if anyone knows a good source for ordering them.

I have paypal (no gifting) and live in Canada so must be willing to ship into Canada and not through UPS.

Thanks

I might have a wireing part you are looking for do you have a pic of what you need i assume its the 5 speed wireing plug from a fiero pic please to match up part

I will try to get a picture later, as it is already installed.

It is the switch that is mounted on the pivot, with the rod that goes all the way through the switch and connects to the pedal. Different from the straight switches with the long threaded section like the brake switch connector. 2 wire connector, heavy gauge ignition wires.

That connector can come off of just about any GM car from the 80's with a clutch. Very common connector.

quote Originally posted by Electrathon: That connector can come off of just about any GM car from the 80's with a clutch. Very common connector.

I figured as much, unfortunately a recent trip to pick a part proved unsuccessful.

I managed to snap a picture of the connector I need:


And I found this image on google from this thread, it's the top plastic switch, not the lower one with the 2 plugs above eachother.


And any ideas or sources for the flywheel?

Anyone?

PayPal me $10 and I will ship it out. arw62@aol.com

[This message has been edited by Electrathon (edited 02-26-2012).]

Will do.

Thanks

quote Originally posted by Electrathon: PayPal me $10 and I will ship it out. arw62@aol.com

Got it. I will send it tomorrow.