Pennock's Fiero Forum
  The Mall - Archive
  86 v6 motor part out

T H I S   I S   A N   A R C H I V E D   T O P I C
  
Email This Page to Someone! | Printable Version
86 v6 motor part out by 84se2m4
Started on: 01-04-2012 02:59 PM
Replies: 8
Last post by: fieroloco on 02-05-2012 11:31 AM
84se2m4
Member
Posts: 389
From:
Registered: Oct 2011

Feedback score: (2)
Leave feedback

Rate this member
Report this Post01-04-2012 02:59 PM Click Here to See the Profile for 84se2m4Send a Private Message to 84se2m4Direct Link to This Post
I have a 2.8 here with nearly everything on it, i have taken the alternator, alt bracket and thermostat housing. I have everything else, throttle body has seonsors on it but is seized. Will ship

[This message has been edited by 84se2m4 (edited 01-06-2012).]

IP: Logged
PFF
System Bot
DLCLK87GT
Member
Posts: 2694
From: South Jersey, USA
Registered: Feb 2009

Feedback score:    (9)
Leave feedback

Rate this member
Report this Post01-04-2012 04:44 PM Click Here to See the Profile for DLCLK87GTSend a Private Message to DLCLK87GTDirect Link to This Post
Is it bone stock or modded? I'd be interested in any aftermarket parts, roller rockers, headers, cam etc etc.
IP: Logged
84se2m4
Member
Posts: 389
From:
Registered: Oct 2011

Feedback score: (2)
Leave feedback

Rate this member
Report this Post01-04-2012 09:38 PM Click Here to See the Profile for 84se2m4Send a Private Message to 84se2m4Direct Link to This Post
bone stock, sorry
IP: Logged
John Miller
Member
Posts: 344
From: Freemansburg,Pa USA
Registered: Dec 2002

Feedback score:    (7)
Leave feedback

Rate this member
Report this Post01-06-2012 10:59 AM Click Here to See the Profile for John MillerSend a Private Message to John MillerDirect Link to This Post
I'm looking for the oil pressure sending unit (3 prong).

Thanks, John
IP: Logged
84se2m4
Member
Posts: 389
From:
Registered: Oct 2011

Feedback score: (2)
Leave feedback

Rate this member
Report this Post01-06-2012 11:15 AM Click Here to See the Profile for 84se2m4Send a Private Message to 84se2m4Direct Link to This Post
The motor had the older style with the little vent hole, needless to say water got in and it doesnt work correctly (pegs the gauge)
IP: Logged
84se2m4
Member
Posts: 389
From:
Registered: Oct 2011

Feedback score: (2)
Leave feedback

Rate this member
Report this Post01-07-2012 02:57 PM Click Here to See the Profile for 84se2m4Send a Private Message to 84se2m4Direct Link to This Post






Removed all of those today, ready to ship. Make me and offer minus shipping!


The EGR tube doesnt look to be cracked although it might have been welded near the flange. Take a look at the pics.

Paypal addy :bowsa123456@hotmail.com


Thanks
IP: Logged
fieroloco
Member
Posts: 207
From: mexico
Registered: Dec 2008

Feedback score: (3)
Leave feedback

Rate this member
Report this Post01-09-2012 04:37 PM Click Here to See the Profile for fierolocoClick Here to visit fieroloco's HomePageSend a Private Message to fierolocoDirect Link to This Post
paypal sent
IP: Logged
84se2m4
Member
Posts: 389
From:
Registered: Oct 2011

Feedback score: (2)
Leave feedback

Rate this member
Report this Post01-10-2012 01:34 PM Click Here to See the Profile for 84se2m4Send a Private Message to 84se2m4Direct Link to This Post
IP: Logged
fieroloco
Member
Posts: 207
From: mexico
Registered: Dec 2008

Feedback score: (3)
Leave feedback

Rate this member
Report this Post02-05-2012 11:31 AM Click Here to See the Profile for fierolocoClick Here to visit fieroloco's HomePageSend a Private Message to fierolocoDirect Link to This Post
i got it thanks
positive feedback
IP: Logged



All times are ET (US)

T H I S   I S   A N   A R C H I V E D   T O P I C
  

Contact Us | Back To Main Page

Advertizing on PFF | Fiero Parts Vendors
PFF Merchandise | Fiero Gallery | Ogre's Cave
Real-Time Chat | Fiero Related Auctions on eBay



 Copyright (c) 1999, C. Pennock