Need to clean the garage. Threw away all the junk parts need to find a home for the good stuff.

If my prices aren't reasonable, shoot me a reasonable price. Goal is to clean the garage, not make excessive profit.
If you need photo's shoot me an e-mail and I'll oblige.

88 Specific Parts Condition/Notes Price

Front Brake Calipers Serviceable as is. $40
Includes brake lines and mounting bolts
Steering Rack Ready for use, removed from a 75k car $100
Front control arms Cleaned, primed, bushings removed $100 set of 4
includes serviceable lower ball joints
Front sway bar includes all brackets & links $20
V6 Exhaust Y pipe Includes OEM foil heat shielding $20
V6 Coolant crossover pipe Ready for use $20
Rear suspension links Complete set of 6 pieces $50
Rear suspension knuckles Blasted clean, 75k miles $50
Brown dash lower left corner has usual ding $25
Rear deck (coupe) includes luggage rack, nice condition $25
Rear coupe bumper cover White, good, (can be used pre 88) $25
Coolant tubes one has minor kink not affecting function $50 set of two
V6 Flywheel & clutch Ready for use $20


Not 88 Specific

Front hood Minor damage near left light opening Free
V6 Heat Shields most every heat shield, cleaned & ready $5, one or all
V6 Air cleaner parts both styles, rubber tubes, housing etc $10 / set
V6 engine brackets, mounts most every one, all serviceable $5, one or all
V6 Harmonic balancer reconditioned, painted, includes pulley $15
V6 Exhaust Y pipe Ready for use $15
V6 coolant crossover pipe Ready for use $15
CS Alternator Ready for use $20
Wiper motor and tank Ready for use $20
Spare tire well Ready for use $20
Hood hinges Ready for use $10
Door panels White, non Aero, complete doors available $10 each
Rear quarters White, non aero $10 each
Starter Ready for use $10
Rear wheel bearings Ready for use $15 each

Gauges
Coupe Tach, 2 speedo’s, Temperature $5 each, $10 for all
SE, 85GT style Tach, 85mph speedo, Temperature $5 each, $10 for all

Getrag Transmission
Includes:
-Excellent condition Getrag with output shaft support bearings/seals, new diff carrier bearings.
-Clutch master cylinder and throw out slave cylinder
-Select & shift cables
-Shifter Assembly
-Pedal Assembly
** everything to convert/upgrade your car to a Getrag manual transmission $750

88 Tech 4 Engine
I’m nearing completion of a total rebuild on a low mileage 88 2.5 liter motor.
All new wear parts including coated hypereutectic pistons & premium rings, seals, etc.
Will include complete intake assembly, ignition, tin, starter, alternator >> ready to drop in. $1000


Shippings on you but my cost is your cost. If near Iowa, I can help deliver to neighboring states (for big items).

E-mail is better than PM. dtdejong@Lcom.net or ddejong@clipperwind.com
Darian

You have a PM

Timcha,
responded to the PM
Darian

pm sent for front sway bar and rear links

The cable I need is for an 87 5-speed. I hope you'll understand my explanation. It goes from the , I think speed censor on the transaxle, to a conector by the air cleaner . As I look at the motor, it's sort of on the same line as the distributor& on the trunk side of the motor. I wish I had a name for it. All the people I know & I don't have a name for it !!!! I hope you can help me out . Shipping to my work in 60185. Mel ( melndij@aol.com ) you can e-mail me for my address if you need it

[This message has been edited by MEL H. JOHNSON (edited 12-11-2011).]

Mel,
I don't have the wire that you are looking for. Sorry.

Working on shipping quotes for the other requests.

If inquiring about shipping or making an offer, please PM/E-mail with zip code.

Darian

Not a problem & Thanks anyway !!! Mel

Is the Getrag cables for sell the select and shift for the five speed Getarg i see u have them in a package deal with your getrag send me a pm if they are

I'll take the 1988 rear knuckles. I also need an automatic transmission shifter mechanism and auto console surround faceplate (tan if you have it).

PM also sent.

Jonathan

All PM's & emails responded to. Looks like rear suspension pieces & front sway bar are spoken for.

I'd rather not separate the Getrag tranny/cables/shifter/pedals bundle if possible.

Darian

Darian, I just sent the payment via paypal for the rear links and knuckles.......thanks for the great deal! I have been looking for a set of these for ages........

Picked up parts today. Great prices and communication. Thanks again!

Rear suspension links Complete set of 6 pieces $50


do these have bushings still on them?
how much for shipping to Pewaukee 53072 through Fed Ex Ground or UPS Ground?

thanks!!

PM me please

Thanks all for the response and purchases.

So far items that are gone or spoken for include:

-Rear suspension links
-Rear knuckles
-Rear bumper cover
-Clutch
-Front hood
-Wiper motor
-Rear quarters
-Getrag setup

Thanks again to the great buyers out there.
Darian

Darian,
Sent you payment on the Getrag today! Looking forward to the swap this spring!
Brian

------------------
Brian Blair

88 GT 3.4S/C ~ Fiero factory for a 5 speed swap soon!
04 Duramax Crew cab dually
86 Checkmate enchanter
87 Checkmate playmate

Anyone know how to ship large bulky items for a reasonable price? (Bumper cover)

I sold the one I have listed to a member but now I can't seem to get it shipped for anything close to the price UPS originally quoted.

I realize the dimension calculation should be under a total of 108" - and it is.
The weight is only 21#. $175 for shipping is BS. (approx $ that both UPS and Fed Ex are now quoting)

Greyhound is the only way I know of to ship large items cheap. I got an F355 style front bumper shipped from CA to NH for under 75 bucks. Only problem is it doesn't go right to the person, it goes to the nearest station that accepts packages. Not a problem if your in a populated area, but for me it was an hour away. Customer service is lousy and tracking is non-existant. Still worth if for the lower cost.

is the tach you have for sale like this one?

http://www.blackgto.com/fiero/dash.jpg

PM'd on the tach request. Yes, gauges still available.