I have a full set of 3 piece Turbo racing rims for sale. 15x7 fronts with 5" backspace, 16x9 rears with 4 1/2" back space. 100mm x 5 bolt pattern. Extremely light weight, ~14# fronts, ~16# rear, vintage and rare.

They have not been on a car in over a decade, boxed and stored in the attic. The will probably need to be taken apart, cleaned, clear coated and resealed. Rims are in pretty good shape. Centers are in great shape with only a little oxidation at the mount face.

These are real MAGNESIUM centers with bolted on spun aluminum rim halves. You can buy new halves and change wheel diameter and back spacing to fit your needs.

I will be putting these on Ebay soon.
$300 each, OBO plus shipping.



The powder coating is in great shape, but I am missing One center cap.




rear


front





rear



front
------------------
yellow 88 GT, not stock
white 88 notchie, 4 banger

[This message has been edited by ccfiero350 (edited 08-16-2011).]

Not going on the imsa?
www.myfiero.com will help post pics
I know they are too rich for my blood.

They were, but I changed the bolt pattern to 4.25"x5 and use mustang wheels now.

------------------
yellow 88 GT, not stock
white 88 notchie, 4 banger

bump

Dam, thats allot of bolts holding them wheels together... Find some Titanium nuts/bolts and I bet you could reduce the wheel weight a least another pound or two

I have looked into it, its about $4.78 per nut/bolt/washers. But if your serious about your unsprung, rotational weight.

I posted a link to your sale on my local VW board as these are quite awesome wheels. So if you get an e-mail or two from some VW people, it's probably my fault.

------------------
'88 GT- 3800 Turbo 11.367@121.03mph
FOR SALE
GM Tuners

"Looks hot but they're not".

Always one of my favorites.