EDIT: i have sold the Power mirrors w/ harnesses Seat belts Gauges (not the rally gauges) Trans/Axles/shift cables/Shifter Assy Ft Bumper All of the underhood plastics/Hinges/etc Brake Booster/Master Cylinder Engine/Decklid vents Seats/Door Skins/Quarter pieces Tail Lights (pending) Sail Panels (pending) Ebrake lever/springs/front cable (pending) Decklid torsion bars and wing RH headlight motor (pending)
Everything else is still available. The car will be sent to a yard by the 12th of August
so i was working on this car for a friend, he decided he didn't want to spend the 1500 or so to fix it. so now it's sitting in my garage disassembled. and it needs to go
SPECS: 86 GT with 2.8 and 4 speed (white with grey interior) someone removed the AC and Cruise stuff it's been sitting for 6-7 years interior is in really good shape (smells funny though, from sitting) front pass. side was hit by PO needs clutch work power everything, premium sound.
If you have any questions PM me or post here.
[This message has been edited by stinky817 (edited 08-08-2011).]
IP: Logged
09:57 AM
PFF
System Bot
woodrow50 Member
Posts: 294 From: Richmond, Texas, U.S. Registered: Feb 2010
------------------ 1986 Pontiac Fiero SE 3.4L | The Fiero Blog (Since April 2000) ----------------------------------------------------------- My Portfolio site | JustinChristie.ca
IP: Logged
09:46 AM
mwhite Member
Posts: 47 From: Caledon, Ontario, Canada Registered: Jan 2008
all PM's that i've gotten have been responded to. mwhite, you're second in line for the shifter.
payment sent for the 4 speed shifter with switch. thanks Bryan!
------------------ 1986 Pontiac Fiero SE 3.4L | The Fiero Blog (Since April 2000) ----------------------------------------------------------- My Portfolio site | JustinChristie.ca
IP: Logged
01:40 PM
Jul 21st, 2011
stinky817 Member
Posts: 230 From: Delta, PA, USA Registered: Nov 2008
If it has it - I am looking for the sheet metal heat shield under the slave cylinder. Not the exhaust crossover pipe heat shields.
------------------ Rodney Dickman
Fiero Parts And Acc's Web Page: All new web page!:www.rodneydickman.com Rodney Dickman's Fiero accessories 7604 Treeview Drive Caledonia, WI 53108 Phone/Fax (262) 835-9575
IP: Logged
12:50 PM
stinky817 Member
Posts: 230 From: Delta, PA, USA Registered: Nov 2008
Shifter arrived. really good shape. Bump to the top and +1 for you. thanks!!!!
------------------ 1986 Pontiac Fiero SE 3.4L | The Fiero Blog (Since April 2000) ----------------------------------------------------------- My Portfolio site | JustinChristie.ca
IP: Logged
11:45 AM
PFF
System Bot
Jul 30th, 2011
stinky817 Member
Posts: 230 From: Delta, PA, USA Registered: Nov 2008
getting close to the end of the life of the car sitting in my driveway, and i have a good bit of stuff sold. looking to get more stuff out the door, so a bump for myself
IP: Logged
07:16 AM
Aug 1st, 2011
stinky817 Member
Posts: 230 From: Delta, PA, USA Registered: Nov 2008
i sent you a pm an i may take the exterior door skins an rear gt clip ,quarter scoops , it may take a few extra weeks to find shipping to long view tx.
[This message has been edited by CETICARS (edited 08-02-2011).]
IP: Logged
04:18 AM
stinky817 Member
Posts: 230 From: Delta, PA, USA Registered: Nov 2008
i sent you a pm an i may take the exterior door skins an rear gt clip ,quarter scoops , it may take a few extra weeks to find shipping to long view tx.
well. i honestly don't have a way to get a rear clip to greyhound. but i was thinking that i could put everything you want onto a pallet. if i can if a pallet to my house then i can load it all onto it and see if i can borrow a truck. i'm gunna send you a pm.
Are the headlight assemblys working? If so what would i be looking at paying for both of them, the passenger side rear A arms, starter (if working), and possibly driver side door skin. I would need them shiped to 83647.
------------------
IP: Logged
02:51 AM
z4xx0r Member
Posts: 12 From: Portland, OR, USA Registered: Sep 2009
I suppose I need to make a post stating that I too, have sent a private message to Stinky.
Stinky, you have a new PM!
...doesn't PFF notify you of new PMs anyway?
yeah, it does. i get like 1000 emails a day from here haha
quote
Originally posted by Tank:
Are the headlight assemblys working? If so what would i be looking at paying for both of them, the passenger side rear A arms, starter (if working), and possibly driver side door skin. I would need them shiped to 83647.
the headlight assys are toast. i moved them by hand and they really don't feel too healthy. and the door skins are currently pending. but i have the otehr stuff. i'll send you a PM
[This message has been edited by stinky817 (edited 08-03-2011).]
wing has been sold off of the decklid. not sure if you still want just the lid.
and i apologize to everyone that has been waiting on me. i had to take a brief hiatus, and i should be back in the swing of things tomorrow. possibly tuesday.
quote
Originally posted by Arlyn:
My PM must be in the on slaught. I'll take the 87 GT door skins shipped to 94590. Paypal info is in the PM
and the door skins have already been sold. sorry man
[This message has been edited by stinky817 (edited 08-06-2011).]
no, it has not, but it's pretty covered in rust. if you want it...then you can take it. but i can't make any guarantees on it.
quote
Originally posted by topcat:
How about the radiator fan/shroud?
no, sorry, that was sold with all of the underhood plastics
quote
Originally posted by realliving1:
all A/C lines available? I need undercar hard lines for my '87
i'm not sure, i know that since my friend has owned it (at least '04) the AC compressor has been missing. and i don't know what the inside of the lines look like, or if they're even worth attempting to use. it's open right at the connection on the rear LH frame rail....
parts received , and payment sent via PayPal
