For sale. ACCEL 140008 Electronic E-Core Super Coil

For the 2.5L (84-86)

High energy windings optimized for high performance. Designed to work with both breakerless electronic ignition systems and late model computer controlled ignition systems. E-core design minimizes inductance losses and maximizes energy output. Special high temperature epoxy resists shock and vibration, while increasing thermal conductivity. The finned injection molded housing provides efficient cooling ensuring long life and great looks. SAE male tower offers greater coil wire retention and protection from arcing. Comes with a universal Accel 8.8mm coil lead



Maximizes energy output
Finned housing provides cooling for long life
It features 0.5 Ohms of primary resistance
It features 9.6 k Ohms of secondary resistance
Produces maximum voltage of 42,000 volts

Worked when pulled off running car.

Google it. They sell new for about $50-$65.

Buy this one for $20 plus shipping

http://www.jegs.com/i/Accel...0008/10002/-1?CT=999


PM me with your zip so I can get a quote.

Rob

[This message has been edited by qwikgta (edited 11-11-2010).]

Bump

bump

bump

pm sent

Will this work on the V6?
Do you have the wire harness?

don't know? No, what you see is what I have.

Rob

Have it boxed up, ready to go.

Had someone who was getting this, but they never got back to me.

RJ

PMing you now...

Can you PM me a pic of the other side? If it uses the standard GM coil plug, I can extend the stock 2.8 harness, but I believe this has a different connector that requires a special harness.

pm sent.

quote Originally posted by Seanpaul: If it uses the standard GM coil plug, I can extend the stock 2.8 harness, but I believe this has a different connector that requires a special harness.

This coil does not use any connector. Look at the picture. See the two nuts above and below the Accel label? That's your positive and negative attachment points for this coil.

You have a pm!

WILL BUY THIS ASAP!!!! PM SENT

quote Originally posted by qwikgta: For sale. ACCEL 140008 Electronic E-Core Super Coil For the 2.5L (84-86) High energy windings optimized for high performance. Designed to work with both breakerless electronic ignition systems and late model computer controlled ignition systems. E-core design minimizes inductance losses and maximizes energy output. Special high temperature epoxy resists shock and vibration, while increasing thermal conductivity. The finned injection molded housing provides efficient cooling ensuring long life and great looks. SAE male tower offers greater coil wire retention and protection from arcing. Comes with a universal Accel 8.8mm coil lead Maximizes energy output Finned housing provides cooling for long life It features 0.5 Ohms of primary resistance It features 9.6 k Ohms of secondary resistance Produces maximum voltage of 42,000 volts Worked when pulled off running car. Google it. They sell new for about $50-$65. Buy this one for $20 plus shipping http://www.jegs.com/i/Accel...0008/10002/-1?CT=999 PM me with your zip so I can get a quote. Rob

quote Originally posted by hyphynator1984: WILL BUY THIS ASAP!!!! PM SENT

Well I am first in line as I have been pm-ing him for a while now

no problem

quote Originally posted by FirstDrCar: Well I am first in line as I have been pm-ing him for a while now