it's an 86 gt t top car. i've got videos of the car running low 11's on youtube on it's old setup. i've had the car running on the new turbo setup. 8lbs was faster then the previous 16lbs with n2o and a whipple on 12lbs. i just have no more desire. i'll do my best to list what the car has. i'm just looking for an offer. if someone wants it they'll be getting a exhaust setup and i'll give them the cad file to create another intake manifold. i'm keeping the intake manifold and orginal exhaust i made.
2008 short block with under 8000 miles on it. l32 heads that have 40 hour's of port work on them. port work was done by a friend who has many 3.8's running 7 to 9 seconds in the quater.
trans is a triple edge performance one. can't find all the details, but it was over 3k and has less then 500 miles on it.
pacesetter headers converted to run a turbo setup, black ceramic coated and black heat wrapped. crossover is coated with a t4 turbo flange.
18x7 chrome wheels is 80% tread toyo's
17x8 black widow racing wheels with anodized red accents. look really good, fronts are hoosier a6's and rear are m/t et streets. fronts need replacing.
have a tuner, forgot which one though haha
needs an intercooler, made a custom six core spearco that took the place of the trunk, will be keeping that also.
kyb's and eibach's
88 calipers with 12" vette rotors.
some new t top seals that were never installed.
black suede seats.
oe mesh wheels
the car does need paint and there is water damage stains to the carpet underneath where the floor mat's go.
will include a turbonetic's gtk850 if need be. it's got a black ceramic coated turbine housing and is one of the best turbo's on the market. i'm not looking to make a ton of money, i will help whoever purchase's the car get it going, will guide and help source whatever it needs. help tune if need be. this car was a monster. i just don't have the desire for it anymore and i don't want to see it rot in my driveway. so make an offer or email me at Billybo455@aol.com if interested.
thanks for your time.
blake
IP: Logged
02:22 PM
PFF
System Bot
IVANNATINKLE Member
Posts: 913 From: Kansas United states Registered: Jun 2009
Hello , I need some more info : first : the transmission : what is it / come from ... ? estimated power ? Where in Fl are you ? can the car travel ( relatively ) long distance ? any pics or links to a tread ? Thanks .
the car is currently not running. i was in the process of switching my bosch 044 pumps to a weldon 2025 pump in. there's no problem with it rolling around. it has a built 4t65hd from dave at triple edge. m90 with a 50 shot on a stock l32 it was 442hp and 570lbs ot tq on the dyno. there is no build thread on the car because i put it all together in 2 weeks with nother member on here. my orginal goal was to just have a fun car that i could autox and drag once in awhile. wasn't great at either, but it was a lot of fun. if you have any other question just email me. prolly be a little faster response.
the car was super reliable, i drove it a few places, but there's no telling what issues may or may not come up if someone decided to go turbo. it does have 130lb springs, double roller timing chain, all valves were matched to the seats, zzp stage 3 turbo cam. someone could put a m90 setup back on the car for the cheap and a walbro pump and have a 300+hp setup.
IP: Logged
09:28 AM
Zimmerator Member
Posts: 46 From: Belgium & Florida some times Registered: Nov 2009
Thanks for the precisions! I read the post to fast and didn't see it was not running . I like your car but I need a good running one ( body doesn't matter , nore the interior ) If you complete or fix it , i'll be interested .
IP: Logged
11:12 AM
Mar 15th, 2010
mptighe Member
Posts: 3321 From: Houston, TX Registered: Aug 2009
these are the videos i watch when im drooling at fieros... actually it was your second video that stoppedme from buying my bosses vette and finish my fiero good luck on your sale. if i lived about a thousand miles closer i would throw an offer at you but i dont
quote
Originally posted by Billybo455:
the car is currently not running. i was in the process of switching my bosch 044 pumps to a weldon 2025 pump in. there's no problem with it rolling around. it has a built 4t65hd from dave at triple edge. m90 with a 50 shot on a stock l32 it was 442hp and 570lbs ot tq on the dyno. there is no build thread on the car because i put it all together in 2 weeks with nother member on here. my orginal goal was to just have a fun car that i could autox and drag once in awhile. wasn't great at either, but it was a lot of fun. if you have any other question just email me. prolly be a little faster response.
I hope everything is ok, Billybo455 hasn't posted in here in over a week, and hasn't returned my pm's or emails.
Blake doesn't check here very often. I hope he stays away for a while cause I really want this car. The drivetrain, anyway...
I helped Blake get the 3800 in and running the first time. Figures... I still don't have mine done and he's already moving on.
When I talked to him the other day, he had no offers yet. I bet if you make a serious offer he'll reply. If not I can probably get ahold of him for you too if he doesn't check back here.
For what he's willing to sell everything for, you'd be gettin a steal and a half. He has SOOOO much money in this car. I can't believe he's selling it. Everything he put in was new, high-dollar stuff too.
IP: Logged
01:54 PM
Mar 25th, 2010
mptighe Member
Posts: 3321 From: Houston, TX Registered: Aug 2009
Does anyone have Blake's contact information? I've emailed him twice now and have sent him a few pm's. I honestly don't understand making a thread about selling your car then not checking in. I understand what everyone has said, but I emailed his personal email, and no response in over two weeks now. To be clear, I'm not trying to buy his car, but I'm trying to buy something else from him. I even pm'd 2002z28ssconv and didn't get a response.
[This message has been edited by mptighe (edited 03-25-2010).]
IP: Logged
11:22 AM
Terry_w Member
Posts: 930 From: Fort Worth,TX Registered: Sep 2008
He could have spam filters that are kicking you out and he doesn't watch his junk mail. Some people just don't reply when you ask them something they are not interested in. (Not me) but it happens a lot. Not making any accusations or excuses for him just stating some reason you might not get a reply.
Then of course there's the common reason that Some people are just jerks .
[This message has been edited by Terry_w (edited 03-25-2010).]
IP: Logged
12:22 PM
PFF
System Bot
Apr 3rd, 2010
mptighe Member
Posts: 3321 From: Houston, TX Registered: Aug 2009
2002Z28ssconv could you see if Blake is still around please? I still haven't been able to reach him either through here or through the email he listed.
IP: Logged
01:43 PM
May 11th, 2010
mptighe Member
Posts: 3321 From: Houston, TX Registered: Aug 2009
Bump, did anyone ever get ahold of Blake? It's important that I get in touch with him as there has been a new development for T-Top seal reproduction and we need a good set to mold off of. Can someone please get me in touch with him?
[This message has been edited by mptighe (edited 10-25-2010).]
IP: Logged
11:21 AM
Apr 12th, 2011
mptighe Member
Posts: 3321 From: Houston, TX Registered: Aug 2009
One more bump, last I heard 2 different well-respected members are willing to possibly take on remaking the molds. I'm willing to buy these. If anyone can help get in contact it would help ALL of us T-Top owners.