I bought Maddanceskillz 3.4 and put it into my 88, so I didn't use the non-88 parts. I have a grand am rear brake swap, aluminum cradle bushings, sway bar with poly, master and slave cylinders for a getrag, control arms, cradle, spindles, hubs. Brakes have a little surface rust from sitting outside for the last 2 weeks, but they'll clean up. Not looking to make a killing on this stuff, just nothing I need. I'm open to offers. Email me @ kevincdennis@gmail.com
Those brakes have about 8k on them, and were brand new this year. Same with the aluminum bushings. The sway bar he mentioned is a setup for a pre-88, meaning you can use it on an 84-87 car which never came with a swaybar. It helped a lot with bump-steer back there.
[This message has been edited by MadDanceSkillz (edited 10-10-2010).]
hey bro I got the aluminum bushings today but one of the bushings is not usable it was heated and beat so bad that its now too misshapen to fit in the cradle plus I can't even get a bolt through the center
