I have lots of stuff in the basement, need to move some of it. I am open to offers and pricing does NOT include shipping, most stuff can/will be shipped USPS or FEDEX.

91-95 3.4 DOHC intake manifolds,great for porting projects - $15+shipping


Stock V6 dogbone with poly bushings installed - $15+shipping

any 2.8 manifolds (upper/middle/lower) - $10+shipping

V6 alt and alt bracket (unsure if alt is funtioning or not) - $20+shipping


I have a 2.8 factory carb manifold (off an S10 I think) that was attempted to be powder coated I think - $10+shipping

Most control arms 84-87 front or rear - $151+shipping

I have two (2) front 84-87 sway bars - $10+shipping

Stock shifter out of an 87GT 5spd with leather boot - Sold

Stock cut down shifter - SOLD

Stock V6 exhaust from the y pipe back with cat still on and tips - $20 pick up only


Front 84-87 KYB gas shocks, probably ~25k on them - SOLD

Rear KYB GR-2 struts, probably ~25k on them - $20+shipping


Stock 3400 cam, super low mileage, said to have come out of a crate motor - $15+shipping

Suspension Techniques rear lowering springs, also cut either a half or a full coil,can't remember - $25+shipping


3400 front timing cover with crank sensor - $15+shipping


Aero rear bumper with ribbed triming, painted flat black - $20 pick it up


(2) A/C lines- compressor to hardlines - $10+shipping


A/C hard lines that run lenght of car - $15 pick it up
Ill add more as I come across it and can get pics if needed

------------------

By:Custom2M4
in process-12" front brakes using '88 calipers and '88 brakes in rear
'88 rear suspension, Held adjustable links solid mounted
94 3.4TDC, 60-1 BB turbo,A/W IC, Tial 38mm, QuarterMaster button flywheel/twin disk clutch, ARP hardware, fully balanced bottom end, Ported Heads

[This message has been edited by Coinage (edited 10-13-2009).]

I'd like pictures of both the shifters you have for sale. send them to goten@wi.rr.com
Thanks!!

------------------
www.fquick.com/GTXBULLET
1985 Fiero GT All Options
1988 FIERO Coupe "IRON DUKE" 5-Speed (the show car ;-)
1992 Firebird T-Tops V-8 24k original Florida miles(collectors car)

seconds on the short one

Shipping cost for 1 sway bar to 22603? Are mounts, bushings & end links included?

How about a good steering rack?

Thanks!

I know I have a set of end links, I need to look around for the bushings saddles, I will PM you a price tomorrow.

Sorry, no steering rack.

Coming to Lititz Saturday?

Any of the 2.8 intakes have the engraving on them?

------------------
Fieros....to own one you have to own two or three or.....

PM Sent

quote Originally posted by CarverToo: Shipping cost for 1 sway bar to 22603? Are mounts, bushings & end links included? How about a good steering rack? Thanks!

I only have the endlinks with bushings, $30 shipped

TTT

Got some pics of the struts?

Thanks,
Jason

quote Originally posted by BrewCheese: Got some pics of the struts? Thanks, Jason

Added

money sent for short shifter ,sorry for delay ...crappy weather = no internet,now im back on

Got a pic of the carb manifold?

Arn

------------------

quote Originally posted by Arns85GT: Got a pic of the carb manifold? Arn

Ill get a pic tonight

quote Originally posted by mid engine monsters: money sent for short shifter ,sorry for delay ...crappy weather = no internet,now im back on

Part was mailed on Monday

quote Originally posted by Felix The Cat: PM Sent

Parts sent Monday

item recieved ,thanks

ttt

do you have a under exhaust manifold heat shield plate for a V6 2.8? (not the circular one that surrounds the manifold) in ok shape(just not rotting around the top and where the manifolds sit surface rust ok), and need it this saturday under $20 shipped using paypal.

https://www.fiero.nl/forum/Forum4/HTML/049096.html

I dont think, Ill look but dont get you hopes up on me having it.

quote Originally posted by Coinage: I dont think, Ill look but dont get you hopes up on me having it.

Thanks for checking

Edit: Chris Hahn might have one for me

[This message has been edited by Back On Holiday (edited 10-12-2009).]

BOH: Dont have one

TTT

Coinage: You have a p/m

Chris

"""""Stock V6 exhaust from the y pipe back with cat still on and tips"""""

how many miles?
and would you sell just the muffler without the tips, and just cut the cat off right by the muffler (leave 6" of pipe there)
and ship to 53072?
let me know.

bump

looking for the exhaust pipe that goes from both exhaust molfold and out the muffler. lmk

quote Originally posted by Coinage: I have lots of stuff in the basement, need to move some of it. I am open to offers and pricing does NOT include shipping, most stuff can/will be shipped USPS or FEDEX. 91-95 3.4 DOHC intake manifolds,great for porting projects - $15+shipping Stock V6 dogbone with poly bushings installed - $15+shipping any 2.8 manifolds (upper/middle/lower) - $10+shipping V6 alt and alt bracket (unsure if alt is funtioning or not) - $20+shipping I have a 2.8 factory carb manifold (off an S10 I think) that was attempted to be powder coated I think - $10+shipping Most control arms 84-87 front or rear - $151+shipping I have two (2) front 84-87 sway bars - $10+shipping Stock shifter out of an 87GT 5spd with leather boot - Sold Stock cut down shifter - SOLD Stock V6 exhaust from the y pipe back with cat still on and tips - $20 pick up only Front 84-87 KYB gas shocks, probably ~25k on them - SOLD Rear KYB GR-2 struts, probably ~25k on them - $20+shipping Stock 3400 cam, super low mileage, said to have come out of a crate motor - $15+shipping Suspension Techniques rear lowering springs, also cut either a half or a full coil,can't remember - $25+shipping 3400 front timing cover with crank sensor - $15+shipping Aero rear bumper with ribbed triming, painted flat black - $20 pick it up (2) A/C lines- compressor to hardlines - $10+shipping A/C hard lines that run lenght of car - $15 pick it up Ill add more as I come across it and can get pics if needed

The y-pipe? I have one of those. $20 plus shipping?

Do you know the history of the alternator? Is it a discount store special, or OEM? If it's OEM, what year?

pm sent