Shipping is to 48 USA states via UPS Ground, sorry no Canada - I hate going to the Post office Prices do not include shipping, shipping will be actual cost. Paypal preferred, but check acceptable - item ships when paid.
Front Springs, $10 set Front Wheel bearings/(Hubs already SOLD Disregaurd pic) strut tower braces $10 set Upper front control arms $10 each, $15 set
Support Bars, $8 each $12 set (SOLD!) Rear A-arms $10 each, $15 set (SOLD!)
Front 88 Cradle $50, shipping going to be costly on this.
Exhaust tips, $25 set - PM if you want better pics, I didnt remove the old pipes connecting from the curve, might just do that to make them look better
Another pic of the upper front control arms which are $10 each, $15 set Lowers are also $10 each, $15 set
rear knuckles, $5 set (SOLD!) rear bearings, $5 set (unknown status)
Dr side t-top rear trim $25(SOLD!) P/S broken T-Top rear trim $10 - if you want both the P/S and D/S (SOLD!) 88 Steering rack w/ Tierods removed(they are shot) $40
[This message has been edited by Back On Holiday (edited 06-02-2009).]
Hey Andrew, hang onto that manual axle outer end for me. I'll snag it next time I get up that way. Shoulda grabbed it at Lititz, but spend waaaay too much cash before I got around to looking at your parts...
IP: Logged
10:20 PM
PFF
System Bot
Back On Holiday Member
Posts: 6238 From: Downingtown, PA Registered: Jul 2001
Hey Andrew, hang onto that manual axle outer end for me. I'll snag it next time I get up that way. Shoulda grabbed it at Lititz, but spend waaaay too much cash before I got around to looking at your parts...
it was $1......
IP: Logged
11:44 PM
May 25th, 2009
Back On Holiday Member
Posts: 6238 From: Downingtown, PA Registered: Jul 2001
I'm about 45 mins north of you. I might need that 88 Front cradle. I'm getting mine measured hopefully this weekend or early next week. If mines tweaked, I'll pick this up. I'll let you know through PM as soon as I know. Thanks!
Justin
------------------ 1988 Fiero Formula 4-spd- 3400sfi intercooled turbo Haltech ECU. Here comes 350+whp 1991 Galant VR4 - Summit White 2.3L, SCM61 powered Slammed Sedan 1990 Eclipse GSX - parted out 1992 S10 4x4 - lowered, bike/quad hauler, dd 1995 Kawi Ninja zx7r 2004 Honda TRX450R #33W MX
1987 Yamaha Warrior - for sale
IP: Logged
11:12 PM
Jun 4th, 2009
Back On Holiday Member
Posts: 6238 From: Downingtown, PA Registered: Jul 2001
I'm about 45 mins north of you. I might need that 88 Front cradle. I'm getting mine measured hopefully this weekend or early next week. If mines tweaked, I'll pick this up. I'll let you know through PM as soon as I know. Thanks! Justin
I'm home all this weekend if your interested!
IP: Logged
06:40 PM
Jun 17th, 2009
skoon Member
Posts: 411 From: charlotte nc Registered: Feb 2008
Andrew, put them rear hubs aside for me as well...if they spin freely and don't feel too "dry" that is...I'll take em when I pick up the outer axle end and bring back your T15 torx driver...
IP: Logged
03:49 AM
Back On Holiday Member
Posts: 6238 From: Downingtown, PA Registered: Jul 2001
Andrew, put them rear hubs aside for me as well...if they spin freely and don't feel too "dry" that is...I'll take em when I pick up the outer axle end and bring back your T15 torx driver...
Hubs not 4sale, heres the current thread for my stff
