96 SC 3800 heads, higher miles but good shape, $30+expensive shipping.

Starters $5+shipping, have about 5 of them, will work on any FWD setup, will test before shipping

L67 injectors, 12 with clips complete, $10 each shipped firm. 5 without clips (function 100% fine) $5 each shipped.


valve covers $10 each, alternator brackets (hbody and wbody)

coil packs, ICM (have many of these) combo is $40 shipped will seperate coils/ICM. Wbody supercharger tensioner, $30 shipped, 98TB, $30 shipped, Hbody tensioner $30 shipped.

wbody 97/98 alt brackets, lift brackets, and engine/trans brackets

hbod and wbod AC brackets

"fiero 3800 swap brackets and rubber" $50 shipped as a package


IF you see some brackets you want, make a offer.

I'll take one of the valve covers....one with an oil hole. Preferably the best of them (will be cleaned and painted). PM about shipping and/or pickup.

The big aluminum AC bracket will be useful to me as a spare. How much do you want for it? In the other pic, do I see the evap solenoids?

hey dark,
got anything else 3800 related? pullies, N* TB's??
that is all I need /want

quote Originally posted by revin: hey dark, got anything else 3800 related? pullies, N* TB's?? that is all I need /want

I have a 98 northstar body, $5+shipping (its pretty bare)

3.25 press-on pulley, $40shipped.

Rockers, pushrods, low mile timing chains, front covers, etc, I have everything from a few 3800's around the shop somewhere. I am pretty good about bolts as well.

I will hold onto the giant hbody bracket, I cant believe it wasnt here when you came over... I found it in another pile a few days ago along with all the other wbody ones lol.

Cool. THe 2-piece ones didn't fit for me, so I used the old "big old aluminum" one I had. It was bent, so I had to unbend it a bit. I'd have never thought that thing could bend like that.

You wouldn't happen to have an ECU or wiring harness would you?

im wondering if you have a clip that holds the fuel injector to the fuel rail? i lost one of mine,

also do you have an extra L67 fuel rail?

and a price for just the ICM that sets under the L67 coil packs.

matthew

soon as I get home ill look at the pics (pics dont work on the computers at work) I believe I will need the tensioner for the sc mine woobles, There all the same im guessing

quote Originally posted by Samohtneas: You wouldn't happen to have an ECU or wiring harness would you?

I lent out a 98+ ECU and I should be getting it back shortly.... But these are usually extremely cheap from local junkyards, or even from car-part.com.

But I do have a few wiring harnesses, although they are slightly chopped up I could easily piece together everything you needed for either a manual or a auto swap without much issues, and price it accordingly.

quote im wondering if you have a clip that holds the fuel injector to the fuel rail? i lost one of mine, also do you have an extra L67 fuel rail? and a price for just the ICM that sets under the L67 coil packs.

Good thing you asked!

My fuel rail is sorta beat up a bit... the saginaw connector is busted up a bit, so you would need to cut it off and use a crimp/compression fitting. I would let it go for like 3 bucks plus whatever I figure for shipping.

ICM, 15 + shipping.

Ill toss the clips in, I have them here on my desk actually.

how about $35? should cover shipping, that stupid rail is big.

paypal - wolforthrepair ( at ) comcast.net

quote Cool. THe 2-piece ones didn't fit for me, so I used the old "big old aluminum" one I had. It was bent, so I had to unbend it a bit. I'd have never thought that thing could bend like that.

ill stash it away again next to my harness building tools.

ill send paypal when the money goes into my account, $35 shipped sounds good to me.

might be saturday before payment is sent, but im in no hurry.

matthew

its been two weeks and havent got anything yet, just wondering if you shipped them out yet.

matthew

gonna bump this again.

matthew

bumping this again.

matthew

ICM and goodies being sent out tomorrow, had a small mis-comunication but it has been resolved.

bump

what will the 3800 Fiero brackets work with?
3800 and 5-speed fiero transmission, or 4T65E?
if they'll work with a 3800 and a 4T65E trans I'll take them!
Thanks!!

------------------
1988 FIERO Coupe "IRON DUKE" 5-Speed (the show car ;-)
1992 Firebird T-Tops V-8 24k original Florida miles(collectors car)

[This message has been edited by gtxbullet (edited 06-07-2009).]