I bought this car to do a rebody but I am dismantling a rust free white 1988 Formula 1G2PE1197JP203550 , the car ran fine except it would start and run good when it felt like doing so eventually it was a broken wire leading to the distributor but I have decided to take it apart.

Seat side covers (piece that covers hinge...$25 shipped


Cruise control unit with servo and cannister $30+ shipp


Water crossover pipe............................$35 + shipping


Front calipers... (cores).........................$50 + shipping
Rear calipers.....(cores).........................$50+ shipping
V6 stock exhaust manifold s..................$60 + shipping

Rear cradle............................................$175 + shipping
1 rear hub carriers with hubs...................$30 ea+ shipping

Notch back sails.....................................$35 + shipping


Passenger side Fender...........................$30+ shipping
Engraved intake ....bolts included $50+ shipping

Y pipe ...................................................$45 + sh



Parts will be removed from list as they are sold..

[This message has been edited by gunslinger (edited 10-26-2008).]

First dibs on the front hubs depending on what you know about their condition...

EDIT for mispelling...

[This message has been edited by FieroFanatic13 (edited 07-31-2008).]

if this is a rust free car, why dont you attempt to sell it whole?

seems like this would make someone a nice car and you wouldnt have to put the wrench time in on stripping it.

unless your still keeping the chassis, and doing custom suspension/hubs and all that.

matthew

What kind of condition is the dash and all the gauge/face plates in including the shift console? Is it a auto or manual?

------------------

Sail Panel Window Alternative https://www.fiero.nl/forum/Forum4/HTML/043053.html
My best advice when it comes to your Fiero is to "NOT" do any dealings with www.kitcarman.com
https://www.fiero.nl/forum/A...070315-1-061575.html <~ The drama with kitcarman
https://www.fiero.nl/forum/Forum2/HTML/078336.html <~ finishing and fixing kitcarmans mess
https://www.fiero.nl/forum/Forum2/HTML/079860.html <~ re-do after kitcarmans motor blew up.

Interested in the Rack and the sector shaft that goes between the rack and the column

I'll take first dibs on the headers(if they're headers and not stock exhaust manifolds).

what color is the interior?
please let it be beechwood

quote Originally posted by m0sh_man: if this is a rust free car, why dont you attempt to sell it whole? seems like this would make someone a nice car and you wouldnt have to put the wrench time in on stripping it. unless your still keeping the chassis, and doing custom suspension/hubs and all that. matthew

Just got tired of tire kickers and next weekers.

Are you willing to part with the left and right rear reflector light assemblies?

I am looking for a mint auto shiftplate if you have one.

Dibs on swaybar?

front springs for me whats shipping?

quote Originally posted by Xanth: I am looking for a mint auto shiftplate if you have one.

Look up. I called it first.

dibs on the auto shifter as long as it was leather at one point!

quote Originally posted by gunslinger: Just got tired of tire kickers and next weekers.

Understood. But it sure is a shame to see a running Formula parted out...

-fh

quote Originally posted by gunslinger: I will ship as fast as I can by the post office and Fedex........

Gunslinger, Mapquest tells me there are four (4) Pinecrest in the state? Located in Hillsborough County, Miami-Dade County, Monroe County and Seminole County. Will you tell me which one your located in? I am interested in possible picking up so parts depending on your locations. Thanks, Bill

------------------
88 GT 5 Speed - Black
88 GT Auto - Red 4.9 engine swap in progress
88 GT Auto - Yellow
88 GT Auto - White
88 Coupe 4cyl - Auto - Red-For Sale
88 Coupe 4cyl - Manual - Maroon
86 GT Auto - Black - For Sale - No Title
86 GT Auto - White- Longpre Edition
86 SE V6 5sp converted to GT - Silver - For Sale
86 GT Auto - Gold - project car
97 Grand Prix GTP - Red - 4 door
62 Impala - Anniversary Gold
62 Vette - 4 Speed - White
95 Vette - Auto-White-43,000 miles-For Sale
00 Vette - Auto - White - Convertible

Looking for stock axle assemblies for a manual transmission.
Can be drivers' side or passenger.
Easily popped out of the transmission and rear hubs.
Thanks,
Jurell

------------------
http://i15.photobucket.com/...l1/07-15-07_2140.jpg
http://i15.photobucket.com/.../Jurell1/Misc027.jpg

How about the long, radiator coolant pipes running front to back. Are they free of the crimps many of us have? If so , I would be interested.

Also looking for the little wire clip that is inside the driver side wheelwell supporting the e-brake cable. One end has a clip to clip to the spaceframe. The other end formed in to a loop. This is where the brake cable goes.

Is this Fiero Stick or Auto? Post some pics of inside and outside.

[This message has been edited by FierociousGT (edited 08-02-2008).]

Does it have good trunk carpet?

I would buy the front lower black air dam. Email me at steelpedal.com please. Thank you.

quote Originally posted by sjmaye: How about the long, radiator coolant pipes running front to back. Are they free of the crimps many of us have? If so , I would be interested. Also looking for the little wire clip that is inside the driver side wheelwell supporting the e-brake cable. One end has a clip to clip to the spaceframe. The other end formed in to a loop. This is where the brake cable goes.

The radiator pipes are good but shipping would be a hassle because of the length, and sorry for the late reply been working too much lately but sent pm's out to all and thanks for your interest.

I would like the left white headlight door cover. I will buy the left and right if the price is right.

Does it have cruise control? If so, I need some parts.

anyone call the tail light assemblies yet? They are the ones like on the GT fastback correct? with the Pontiac logo across them? If so I will take them...

How about the stock spoiler also?

A Formula is a notchback, so it'll be the coupe taillights not the GT ones

quote Originally posted by gunslinger: The radiator pipes are good but shipping would be a hassle because of the length, and sorry for the late reply been working too much lately but sent pm's out to all and thanks for your interest.

How about the retaining clips (U-nuts) that secure the spare tire tub up front? I could use them all.

If the taillights are notchback style and in good shape (not all cracked up) I would be interested in them and could possibly pick them up so you would not need to ship them.

How about the silver "Pontiac" logo across the back bumper then? I will gladly take it off your hands...mine was broken when I bought the car...so now I have 3 holes there...

Still interested in the rear wing also...does it come with all the mounting hardware, etc?

PM sent to all I will be through scrapping the car by the week end it has been raining lately plus work.

I'm interested in the seat skins if they're in very good shape, and if they're gray. Please let me know. Thanks.

quote Originally posted by jpmurray: I'm interested in the seat skins if they're in very good shape, and if they're gray. Please let me know. Thanks.

pm sent

Guys sorry for the delay but the car has been stripped completely

Did you get the roof off intact? If so, is it a hardtop?

The top is still on the car and it is a hard top with good headliner.

gunslinger,

I've pm'd but haven't heard back from you regarding the front wheel bearings?

-Gary

PM sent

PM sent.

------------------
'88 Formula V6
'88 GT TPI V8

Are you still parting things out? I would be interested in the alternator, provided it works and will bolt up to the 88 duke...

PM me and let me know.

-Brian