I have an extra FWD Getrag for sale. You'll need Rodney's brackets for the shift cables. It shifts through all gears and spins, but I do think it required a little more effort to spin the input shaft in gear than my existing Getrag. I'm not sure if that might be attributed to it not having any trans fluid in it. Its always been indoors and the case is only a little dirty. The case is in good shape, the ribs on the inside of the bellhousing don't have any scratches or chips. Looking for $50 bucks, pick up (or short distance delivery) near Metro Airport (Detroit).

EDIT: yes it is the correct FWD bolt pattern (not Quad 4).

------------------
Christian
87 Pontiac Fiero GT Burgandy/Silver 5.7L ZZ4 5spd, 88 suspension, C6 polished wheels, C5 Z06 brakes, Konis, poly'd, Spec Stg 3
301rwhp/345rwtq
Stovebolt Powered!!!!!
06 Cobalt SS/SC w/ LSD (the slow DD)

[This message has been edited by CTFieroGT87 (edited 12-06-2007).]

PM sent

if this was a 3.1L GTZ fiero owners should be alright (they will have to split the case to put a fiero speedo in it, and they will need rodneys FWD kit, but if its from a 2.3L quad4 then it wont work on a 60* v6 bell housing (3800 supercharged motors, northstars, 2.8L's 3.1L's 3.4L's and 2.5L motors)

the quad4 transmission is made specifically for the quad4 bell housing.

matthew

pm sent.