You have no idea, im starting to run outta room, my basement is 28x40 inside dimensions, and im OUTTA ROOM!!!
ive been hanging stuff from the rafters, i guess i should have mentioned the headliner boards are not forsale either, its VERY rare for me to get them in one piece.
id consider shipping doors, but the buyers must have deep pockets, most of the doors i have, have power windows and locks, theres a pair of black doors that were once red that i wont sell cause they have power windows locks and mirrors.
matthew
IP: Logged
09:37 PM
86blackse Member
Posts: 1778 From: Ga-TN state line Registered: Nov 2006
Any spoilers in there? Blue? hehe I know that's asking a lot.
------------------ 1984 Fiero SE, White, first love, sold... 1986 Fiero SE 2M6, gold 1988 Fiero 2M4, the Fox 1987 Fiero GT, Blue, 3.4/4T40 Still looking for that perfect CJB 88 GT...
IP: Logged
09:43 PM
m0sh_man Member
Posts: 8460 From: south charleston WV 25309 Registered: Feb 2002
Any spoilers in there? Blue? hehe I know that's asking a lot.
i think black are the only ones i have that are still in one piece, ive got a red and a green one that both split at the seam, most have missing or cracked wing stands as well, normally when i get a car for $100 or so im not too worried about how great all the parts are as long as i get what i was wanting off the car for myself
matthew
IP: Logged
09:57 PM
Oct 25th, 2007
dozol Member
Posts: 679 From: Chicago, IL (Oak Lawn) Registered: Feb 2005
Man I wish it didn't cost so much to ship decklids and spoilers... I have a luggage rack on my 87GT and would either like it to become a clean wingless or put a wing on it. Both expensive options, especially since my car is blue.
------------------ 1984 Fiero SE, White, first love, sold... 1986 Fiero SE 2M6, gold 1988 Fiero 2M4, the Fox 1987 Fiero GT, Blue, 3.4/4T40 Still looking for that perfect CJB 88 GT...
IP: Logged
06:54 AM
josef644 Member
Posts: 6939 From: Dickinson, Texas USA Registered: Nov 2006
im looking for an oil pan for my 86 gt and this tube
dominik
sorry, dont have an oil pan, most of the time when i get a v6 car for parts, it has holes in the oil pan from rod/main bearing pieces, ill check for the tube, but just so you know there is a difference between 4 speed, 5 speed and automatic, something to do with the lower mounting piece that bolts onto the transmission to make it stable, although ive heard people can just leave that mount off and it will work..... ill check, i think i do have one of those tubes but its probably from a 4 speed car, just cant be 100% sure.
matthew
IP: Logged
08:18 AM
m0sh_man Member
Posts: 8460 From: south charleston WV 25309 Registered: Feb 2002
I need a dark gray console, the part that covers the ecm shipped to 77364
ill check on that when i get off work, i know i have one, i just need to check its condition and clean it up, i think there is one hanging in the pictures thats in great shape other than being filthy from dust, should be the one i just removed from a 87 coupe.
these are sometimes hard to get in very good shape, normally the doors are warped and the front mounting tabs are broken off.
matthew
IP: Logged
08:19 AM
PFF
System Bot
Back On Holiday Member
Posts: 6238 From: Downingtown, PA Registered: Jul 2001
i need a working power door lock set up and i could use a pass side power window motor. and a pass side 1/4 panel (gt) and fender (gt) price quote for 29455
i need a working power door lock set up and i could use a pass side power window motor. and a pass side 1/4 panel (gt) and fender (gt) price quote for 29455
this finder and 1/4 panel is a dark grey metallic color, almost black, they need the paint sanded down and repainted, the fender has spider webbing in the paint, definatly needs sanded and re-painted but they are great panels if yours are broken. how's $65 shipped for a fender and quarter panel sound? its going to take a while to get a box prepaired for these if you want them, probably a couple days once payment has arrived.
when you say power door lock setup, you mean the whole guts from inside a door right? if so, i do not remove those, seems like several hours of work, i will sell two entire doors with power windows/locks for $50, $75 if you want them with skins and interior wiring harness
[This message has been edited by m0sh_man (edited 10-25-2007).]
I need a dark gray console, the part that covers the ecm shipped to 77364
$60 shipped to your door, this console is in good shape, it does need 4 area's re-glued to be near perfect, it needs cleaned up some, ive cleaned it just didnt spend alot of time on it, the lower part of the glove box door is alittle loose and needs reglued, and the bottom sides need re-glued, also the area where the shift surround sits could use it, but that area wont be seen once the shift surround is installed.
i give his one a 9 outta 10 once these area's are addressed.
matthew
IP: Logged
05:50 PM
m0sh_man Member
Posts: 8460 From: south charleston WV 25309 Registered: Feb 2002
well ive got one, but the last 2" of the pipe has a rusted area, otherwise its in great shape everywhere else, if you want it, ill sell it cheap, basically cover a small handling fee and shipping, and its yours, you could cut off the bad section and just use a slightly longer rubber hose.
heres a picture.
matthew
IP: Logged
05:52 PM
MusicmanNE Member
Posts: 77 From: Fremont Nebraska, USA Registered: Sep 2007
ive got several of them, but they all need the bushing re-build kit, its about $8 for the three bushings at advanecd auto parts in the help section or $5 if you order them from rodney dickman.
$25 shipped for a single headlight motor, $40 shipped for a pair of them.
ive got so many of them im not 100% sure they would need rebuilt, but its rare for me to find one with good bushings in them, i do test the motors themselves to make sure they spin fine when power is supplied.
if you happen to have any aero front fascia support brackets ( the metal stuff that makes it stiff and keeps it shape) i know a guy who needs a set..it think its a 3 peice set..let me know..thanks tim..
IP: Logged
08:07 PM
m0sh_man Member
Posts: 8460 From: south charleston WV 25309 Registered: Feb 2002
How much for a GT front and rear fascia? Also do you have any A/C compressors that you know work?
not selling GT fascia's, ive got 4cyl compressors that spin free, never tested any of them, no v6 compressors, the 4cyl compressors i have are 87-88 style.
matthew
IP: Logged
08:39 PM
m0sh_man Member
Posts: 8460 From: south charleston WV 25309 Registered: Feb 2002
if you happen to have any aero front fascia support brackets ( the metal stuff that makes it stiff and keeps it shape) i know a guy who needs a set..it think its a 3 peice set..let me know..thanks tim..
Sorry i dont have any.
IP: Logged
08:40 PM
FieroGTdude Member
Posts: 313 From: Sharpsburg GA U.S Registered: Jun 2004
65 shipped? not bad. for the lock setup... i have an aftermarket setup in mine and it will lock, but wont unlock, and i dont want my car to work half way.
sounds like the switching relay in your lock system isnt reversing the polarity so it works backwards, im not an electrical engineer so i cant point you in the right direction to look to fix the problem.
how far away from north myrtle beach are you?
matthew
[This message has been edited by m0sh_man (edited 10-26-2007).]
I need a lower alternator bracket bolt (the one that secures the bracket and the motor mount plate to the block.) Also, if you have a couple decent steering stabilizers, I'd take those as well.
If you've got that stuff buried down there, email me with a price to 46545. Thanks.
[This message has been edited by Doni Hagan (edited 10-26-2007).]
IP: Logged
11:12 AM
Oct 28th, 2007
ss85fiero Member
Posts: 385 From: jacksonville florida usa Registered: May 2006
ive got a grey seat top, its not the stripped 84 seat, its from a 85 coupe, but should be the same as the base 84 seat as well, i do not have a good bottom, its just a top, i can ship the whole thing (its a passenger side) or just the skin, id like $30+ shipping for the top, i can take photo's if you like, or i can put it up on ebay with a $14.99 starting bid and just let it ride, you might get it cheaper, or get it more expensive, its a gamble.
let me know.
matthew
IP: Logged
05:30 PM
m0sh_man Member
Posts: 8460 From: south charleston WV 25309 Registered: Feb 2002
Hey Matt, do you have the lower ground affect in dark red for the drivers side ??? It's the long one below the door !!! I noticed the dark red parts !!!!! MEL
IP: Logged
06:10 PM
Back On Holiday Member
Posts: 6238 From: Downingtown, PA Registered: Jul 2001
Hey Matt, do you have the lower ground affect in dark red for the drivers side ??? It's the long one below the door !!! I noticed the dark red parts !!!!! MEL
sorry mel, the dark red parts are from a 87 coupe, the only body colored car i parted out was a bright red 88GT, i put its body panels on a 88 coupe that i have, (except the fastback clip)
