here we go was a canadian car hit in the front runs and drives mint interior needs to be cleaned



more to come

------------------

DONE: 86gt 5 speed 4.9 complete rebuild with buds outback northstar pistons , delta cams E303 cam , full ported , polished , stronger head springs, and flow tested heads and manifolds. rockcrawl's custom chip , polished crank . too much to list

88 coupe t-top #656 1 of only 339 base coupes made SOLD
85 t-top BEING PARTED
87gt parts car
86 and 87 fiero database www.geocities.com/cwandall/fiero.html

------------------

DONE: 86gt 5 speed 4.9 complete rebuild with buds outback northstar pistons , delta cams E303 cam , full ported , polished , stronger head springs, and flow tested heads and manifolds. rockcrawl's custom chip , polished crank . too much to list

88 coupe t-top #656 1 of only 339 base coupes made SOLD
85 t-top BEING PARTED
87gt parts car
86 and 87 fiero database www.geocities.com/cwandall/fiero.html

Hey man,

Price for the dome light ?

Price for the Rear Roof Outer Moldings RH/LH (#3) ?

Does it have the rear trunk straps for the glass windows ? price ?

Please P.M me back

Thanks.



------------------

[This message has been edited by Mister (edited 07-02-2007).]

quote Originally posted by Mister: Hey man, How much for the dome light ? How much for the rear outer trim? (both left and right) ? Does it have the rear trunk straps for the glass windows ?

i believe the dome light is t-top only. if so i would like to sell it with the t-tops. as far as the straps ill check on them

quote Originally posted by wiccantoy: i believe the dome light is t-top only. if so i would like to sell it with the t-tops. as far as the straps ill check on them

Fast reply LOL...

LMN...Thanks.

How much for the whole top half?(to convert my GT to a t-top car.lol)

More imperative to me right now though...how much for the dash and/or the power door lock switches for both doors...shipped to 77705?

------------------
--David

Are you willing to remove major parts from the engine- front cover, oil pan, lower and middle intake manifolds, or are you hoping to sell it complete?

PM sent

PM Sent

how much for the whole thing

ok

dcfox - top half plus all interior trim needed would just cut it off with a saw and put it on a palet but not cut the weather strips 600. but its up to you to find a way to ship it. never sent anything freight. dash and switch's 75.00 plus shipping . not sure on shipping . not sure how to ship that large of an item. if you want the roof ill throw in the dash and switch's free

topher_time - i can pull any parts that are not too hard to pull when still in the car. would actually pull the parts from my 87 gt parts car. also a 2.8

coyote - 1k for the entire car. has a R tytle

quote Originally posted by wiccantoy: topher_time - i can pull any parts that are not too hard to pull when still in the car. would actually pull the parts from my 87 gt parts car. also a 2.8

Ok, how much would you like for them?

quote Originally posted by topher_time: Ok, how much would you like for them?

are you looking for the fuel rail and throttle body also?

Not at the moment. I've got a line on a throttle body already, and I'm building a new fuel rail.

[This message has been edited by topher_time (edited 07-04-2007).]

Does the EGR valve look OK ?

If so what do you want for it shipped to 55051?

Steve

quote Originally posted by topher_time: Not at the moment. I've got a line on a throttle body already, and I'm building a new fuel rail.

lower and middle 60 shiped . everything is going to be pulled the weekend as long as it isnt raining .

quote Originally posted by fierohoho: Does the EGR valve look OK ? If so what do you want for it shipped to 55051? Steve

just the egr not the tube? if so 10 shiped

quote Originally posted by wiccantoy: ok checked on the straps and they are not in there .

Thanks

edited

[This message has been edited by wiccantoy (edited 07-28-2007).]

quote Originally posted by wiccantoy: complete t-top roof is pending sale

lol, only if I could get the frame WITH the t-top. my frame is bent and my sunroof fiberglass is shot.

[This message has been edited by skstibi (edited 07-05-2007).]

PM sent......

I got an easy one - just want the 2 rear vent covers... Shipped to 60126.


------------------
Todd Thorson
Current Fiero - 84 auto (setting up for the daughter)
http://www.toddsplace.com

[This message has been edited by tjthorson (edited 07-05-2007).]

$10.00 for the EGR sounds good, what do you want for it and the tube?

PM me the price for both pieces and your address and I'll let you know.

Postal or bank money order OK?

Steve

quote Originally posted by tjthorson: I got an easy one - just want the 2 rear vent covers... Shipped to 60126.

aaaah 35 shipped?


fiero hoho pm sent

[This message has been edited by wiccantoy (edited 07-05-2007).]

pms sent for the parts pulled today

PM replied.

ttt

Parts received and in good condition, thanks.

Steve

How are the condition of the seats? I can't really tell, but I'm most interested in the driver seat. Mine has the typical left side torn.
How much shipped to 55445. Just drivers, or both.

quote Originally posted by Jurell Baker: How are the condition of the seats? I can't really tell, but I'm most interested in the driver seat. Mine has the typical left side torn. How much shipped to 55445. Just drivers, or both.

both seats are mint but very dirty from the past few years of sitting

How much would it be for all 4 of the wheel wells?
Also how bad was the car hit in the front because I was converting my bumperpad car to the areo style and I was wondering the condition of the metal piece that mounts under the radiator and also holds the bumper because I don't have that.

Thanx - Dan

steering wheel? pics? price w/shipping to 98604?


thanks
=todd=

quote Originally posted by Cowabunga_kid: How much would it be for all 4 of the wheel wells? Also how bad was the car hit in the front because I was converting my bumperpad car to the areo style and I was wondering the condition of the metal piece that mounts under the radiator and also holds the bumper because I don't have that. Thanx - Dan

car was hit hard enough to require a frame pull . so i cant be sure that section wouldnt be bent

quote Originally posted by wiccantoy: car was hit hard enough to require a frame pull . so i cant be sure that section wouldnt be bent

How about the 4 wheel wells, those are only plastic....?

quote Originally posted by Cowabunga_kid: How about the 4 wheel wells, those are only plastic....?

im sure i can scrape up a set of those between the 2 gt's and the parts in the basement . sure shipping would be pricey though . i guess you want gt and not a coupe correct:?

Yeah I need the GT style (converting the car to aero style front and rear bumpers), but can you check how much shipping would be first, don't want you to do all the work and then shipping be ridiculess. My zip is 34287.

actually shipping on the wheel well liners aren't that bad, you can roll them up and stuff them in a pretty small box. That's what someone did for me when I purchased mine and they arrived intact and just fine. Cost about ten bucks to ship that way.

But I'm interested in the plastic ducting in the trunk for the blower motor. How much shipped to 46835?

well all im off to work a night shift today instead of my normal days . ill make sure to look into all this as soon as i get back .