The car is in NH it has a good fastback let me know if you need any parts

I am looking for the radio and aux gauge face plates.

engine harness available?

quote Originally posted by shawnkfl: engine harness available?

i will have to check the shape of it (the car runs but has a bad knock) its an Auto

I am looking for A-pillar trim, color doesn't matter as long as it comes off in one piece- my old ones didn't
Oy yeah, I also need a throttle body...

[This message has been edited by topher_time (edited 06-23-2007).]

quote Originally posted by shawnkfl: engine harness available?

Damn.

If he passes I'm interested as well, assuming that can fit an 88 that is

------------------
www.FieroDomain.com
Over 120 Fiero Links, Articles, Images, Diagnostics

"If any car is both the parade and the rain, it is the Fiero"

[This message has been edited by Xanth (edited 06-23-2007).]

let me know what you need for the harness and shipping to 33770.

quote Originally posted by topher_time: I am looking for A-pillar trim, color doesn't matter as long as it comes off in one piece- my old ones didn't Oy yeah, I also need a throttle body...

I know i have a few good A-piller trims and the TB is good i just dont know how to ship the trim

quote Originally posted by topcat: I am looking for the radio and aux gauge face plates.

I guess no response to this one means you do not have them?

quote Originally posted by topcat: I guess no response to this one means you do not have them?

Sorry a friend already got them

what color is the interior?

I need the shifter console

------------------

87GT
Massachusetts
ignorantprodigy@aol.com

quote Originally posted by ig88vsbobafett: I know i have a few good A-piller trims and the TB is good i just dont know how to ship the trim

Let me know how much you want for them. Shipping is easy, lots of bubble wrap, and a large box

Do you still have the front spindles? if so how much for the pair and shipping to RI 02864

quote Originally posted by shawnkfl: engine harness available?

It looks like it has had some funny rewiring done to it (splices and stuff) but the car was running) lmk if your still interested

Im thinking like $35 shipped mostly for my time to pull it and the shipping

quote Originally posted by ig88vsbobafett: yeah i have good ones in grey give be a day to get them ready and see how big of a box i need $55+ shipping for the TB and the Apiller trims sound good ?

Should be ok, I need a second throttle body for my new engine, and the a-pillars becasue I keep breaking stuff, oh well, let me know shipping cost. PM me your address so I can send a money order.

They are available from advanced auto? are we talking about the same part? The part I am talking about bolts in between the upper and lower ball joints and is a large cast iron part. I think it is also called an upright...

quote Originally posted by GlennGdman: They are available from advanced auto? are we talking about the same part? The part I am talking about bolts in between the upper and lower ball joints and is a large cast iron part. I think it is also called an upright...

Ooo i was thinking the rotor. they should be good but it will be a few weeks before i can pull them (after i get the car on the trailer for the crusher)

ok that makes more sence to me now. The time frame is okay with me as these would be a spare set for a project I am working on. Now that we are both talking about the same parts, what do you want for those with shipping to RI 02864

I'd buy the quarter windows from you, if available and in halfway decent condition.
Thanks.

quote Originally posted by rwlekey: I'd buy the quarter windows from you, if available and in halfway decent condition. Thanks.

Sorry it had fiberglass ones and i just sold them

did you come up with a price on the spindles?

How about a good factory jack? Mine stripped out and collapsed

------------------
www.FieroDomain.com
Over 120 Fiero Links, Articles, Images, Diagnostics

"If any car is both the parade and the rain, it is the Fiero"

quote Originally posted by Xanth: How about a good factory jack? Mine stripped out and collapsed

$10 + shipping (shouldnt be to much cuzz im in NH)

could you get any pics of the engine harness of what looks fishy?

how much would you want for the wheel bearing dust caps, spindle nuts and washers?? shipped to 14580?

Did you come up with a final shipping price?

looking for a power drivers mirror.

------------------
--David

how bout a front bumper skin, areo style. I live in maine an could pick it up

quote Originally posted by dcfox: looking for a power drivers mirror.

i want to sell thouse as a full set with full wiring

quote Originally posted by ig88vsbobafett: I havnt forgotten about that who ever put the TB on last striped the torx bit so i need to pull the plennum to get it off i will have that off early next week and get you a total price

That's ok. I'm in no hurry, just got the engine stripped and cleaned up and started ordering some accessories.

how much for the drivers side fender? oh and a trunk light if ya got one?

quote Originally posted by topher_time: That's ok. I'm in no hurry, just got the engine stripped and cleaned up and started ordering some accessories.

Just checking in again. Any word or I should say price yet?

[This message has been edited by topher_time (edited 07-15-2007).]

Are the coolant tubes any good? Front to back both. How much if they are?
Also Front hood? I don't need the headlight lids, latch or anything. Just the hood itself. Mines broke on the front edge. And how much?
I live in Rochester so can pick up.
Thanks

[This message has been edited by Gonzo (edited 07-15-2007).]

Could you do around $50 shipped on tail lights? They can be less than perfect.

Thanks,
Greg

------------------

How much for a manifold exaust? (the one closest to the trunk) Also, what condition is your steering wheel in? Mine is oozing gel around the seams whenever it gets hot.