Here it comes,I need to move some stuff!! I have 10 years worth of fiero goodies,and just need to move some of it. SEATS,TRIM,DASHES,FACEPLATES,BODY PANELS,BUMPER COVERS,CARPETS,TONS OF HEADLIGHT MOTORS(both kinds),QUARTER WINDOWS(no GT sorry)MOTORS,TRANNYS,STEERING WHEELS,WIRING,SUB SYSTEMS,YOU NAME IT!!! Please post here,as I have SEVERAL cars I am currently stripping out too.Shipping to Canada may be limited(sorry guys)but give me a try. Please post here,and email me.I will get ahold of you on price,and shipping.I have sold alot of parts thru the years,and alot to PFF'ers too.I have a great rep. if you are close by,you can cruise in and pick up parts too! Thanx alot folks
-Mark Webber
-fierofarm@gwi.net
IP: Logged
02:02 PM
PFF
System Bot
Tom Slick Member
Posts: 4342 From: Alvarado, TX Registered: May 2003
------------------ Down the road she will go with all the memories... 88 GT 5spd (pic above of body) 88 GT 5spd (stock - white) 87 GT 69,xxx miles 87 GT ttop parts car 17 years old and loving it
IP: Logged
03:19 PM
virii01 Member
Posts: 515 From: Lincoln, NE, USA Registered: Mar 2003
Hey Mark... If you're stripping down the car, I'm wondering if you could pull the rear tail light harness off it, and then front wiring harness for the headlights, etc. If its an 87/88 model, can I use that front harness on an earlier year car? Also, I need the interior harness.
(I'm updating ALL the wirng on an 84 base coupe to the 87/88 with 87/88 headlights, backlit gauges, etc)
Thanks! John Cromer Jr.
------------------ --1986 SE V6, Wild Custom Notchback --For Sale Click Me! --1984 SE Modified Notchback
I could use a couple of gas caps...I have a habit of leaving them ontop of the car. Also an Oil cap if you have one rust free.
------------------
"Naw man, not a Ferrari, it's a Fiero. I don't know, its kinda like a poor mans Ferrari. I dont give a damn about what Kelly's says about its value." Part of a Phone Conversation with my Auntie, lol
[This message has been edited by CommanderKeen (edited 02-23-2005).]
IP: Logged
07:23 PM
William Federle Member
Posts: 733 From: Milwaukee WI, USA Registered: Sep 1999
I need the bracket that mounts with one screw on the rear caliper (drivers side) on which the e-brake return spring mounts. The other end of the spring engages the e-brake lever on the caliper, but I need the bracket that it sits on. The two sides are different. I have 2 passenger side brackets but I need a drivers side bracket. Do you have one and how much? I have a 1984 Fiero - I think the brackets are the same for 1984-1987.
IP: Logged
08:31 PM
newfierokid Member
Posts: 278 From: largo,FL, USA Registered: Feb 2004
im looking for a seat skin any color any condition i just need it to make a pattern to make some skins of my own and do u have a 2.8 dont care if it dosnt run
IP: Logged
09:26 PM
84indy Member
Posts: 160 From: Cherry Hill, NJ USA Registered: Mar 2004
Thanx for all the interest guys,I am hitting the sack,will catch up with everyone tomorrow....Keep those posts/emails/pm's comin'I,I'll catchya later. Thanx!!
-Mark
[This message has been edited by Indyellowgt (edited 02-23-2005).]
IP: Logged
11:02 PM
Feb 24th, 2005
Disillusion Member
Posts: 1132 From: Victoria, B.C, Canada Registered: Nov 2004
I can vouch for this guy! And his insane inventory of parts.;D Hey I need another pair of notchy taillights. And I have a small problem the wife threw away the bill of sale on the GT. Can I get ya to write me up another one? Women. Sheeesh. Rich
Do you have the dogbone from a (this is important) 84-85 4 cylinder? bushings aren't important as they will be replaced. The later style have oval holes vs the earlier round bushings.
------------------ John DuRette ***Custom 85 under construction, 87 Coupe in the driveway. The fun never ends!***
IP: Logged
12:47 PM
Indyellowgt Member
Posts: 1950 From: Alfred,Maine,Fiero Country,USA Registered: Dec 2000
I need the bracket that mounts with one screw on the rear caliper (drivers side) on which the e-brake return spring mounts. The other end of the spring engages the e-brake lever on the caliper, but I need the bracket that it sits on. The two sides are different. I have 2 passenger side brackets but I need a drivers side bracket. Do you have one and how much? I have a 1984 Fiero - I think the brackets are the same for 1984-1987.
Indyellowgt, I need the e-brake caliper spring bracket from the passenger side. Can you pull that one for me while you are at it? (P.S. Could use the mounting bolt(s) too.) Thanks.
Bob
[This message has been edited by RTNmsds (edited 02-25-2005).]
IP: Logged
11:12 AM
RTNmsds Member
Posts: 1104 From: Woodruff, SC Registered: Oct 2003
