Some time next week I will have about 30 of the new aluminum housing/double seal Getrag slave cylinders in hand. Anyone that would like to have one should contact me so I can ship them out as soon as they are here for those that need them and have been waiting for them. Price is $79.95 plus shipping. That price is less than the poor quality cast iron slaves in the market today. These are top quality. They are complete with a new bleeder and push rod.



They will not be on my web page. I will have a new web page we are working on and they will be on my new web page (hopefully in a few weeks) . Once these 30 are sold it may be a few weeks or longer before I will have more. Call or email me.

------------------
Rodney Dickman

Fiero Parts And Acc's Web Page:
www.rodneydickman.com
Rodney Dickman's Fiero accessories
7604 Treeview Drive
Caledonia, WI 53108
Phone/Fax (262) 835-9575

PM sent !

Thanks Rodney.

email sent!

Chris

Email sent to the one listed on your website since I've reached you there before. You have a different email addy listed on here, which one is better (for others reference)?

Steven

rodney@rodneydickman.com

------------------
Rodney Dickman

Fiero Parts And Acc's Web Page:
www.rodneydickman.com
Rodney Dickman's Fiero accessories
7604 Treeview Drive
Caledonia, WI 53108
Phone/Fax (262) 835-9575

Thanks rodney, but i wish i saw this sooner cause i just bought a cast iron reman at kragen for 70 bux

When it fails (when), I will be purchasing one of yours. Just a matter of time.

EDIT:
Wanted to ask if the seals in these slaves are compatible with DOT 5?

[This message has been edited by MordacP (edited 07-16-2009).]

I'm in for a couple.

I'll call you today, I need a couple of other things too.

Archie

Rodney
I'll take one-will email you also

The slaves are here. Look just like the preproduction sample I received a while back but the piston is plated and the push rod is plated. I have no doubt they will be top quality. For those that ordered them I ship again on Wed. Priority Mail. Should be there this Friday/Sat. Will have about 18 on hand yet if anyone wants one.

------------------
Rodney Dickman

Fiero Parts And Acc's Web Page:
www.rodneydickman.com
Rodney Dickman's Fiero accessories
7604 Treeview Drive
Caledonia, WI 53108
Phone/Fax (262) 835-9575

is the bleeder an easy size to replace with a speed bleeder?

Looks like another quality product!
The OE's and aftermarkets always seem to develop problems!

------------------


My Web Site www.xnet.com/~paulv
NIFE Web Site ]www.fierofocus.com]

PM Sent, need total to include shipping.
Expect to get a check in the mail. I want and need one.

Ron

[This message has been edited by blackrams (edited 07-21-2009).]

The slaves shipped yesterday for those that preordered. Hoping to hear some feedback as soon as possible. I have no doubt they will be top quality but before I commit to starting on the Isuzu/V-6 4 speed slaves I would like to see these in use for a while.

------------------
Rodney Dickman

Fiero Parts And Acc's Web Page:
www.rodneydickman.com
Rodney Dickman's Fiero accessories
7604 Treeview Drive
Caledonia, WI 53108
Phone/Fax (262) 835-9575

quote Originally posted by Rodney: They all shipped Priority Mail so they should be there Friday/Saturday.

Realizing that my payment was sent via USPS and it is a check so I don't expect the part to arrive quite as fast. If it's here by August 15th, I'll have it available for everyone to see for the Bluegrass Fieros Cookout/Table Dancing and Lying Contest. Never know, someone may have a need. BTW Rodney, you're invited.

Ron

quote Originally posted by MordacP:Wanted to ask if the seals in these slaves are compatible with DOT 5?

can it be that this question is just open? And what is with the master cylinder, can I use for the stock clutch system DOT 4 or 5.1?
thanks

quote Originally posted by teleotti_GT: can it be that this question is just open? And what is with the master cylinder, can I use for the stock clutch system DOT 4 or 5.1? thanks

I'm sure they are but I have sent an email asking.

------------------
Rodney Dickman

Fiero Parts And Acc's Web Page:
www.rodneydickman.com
Rodney Dickman's Fiero accessories
7604 Treeview Drive
Caledonia, WI 53108
Phone/Fax (262) 835-9575

quote Originally posted by americasfuture2k: is the bleeder an easy size to replace with a speed bleeder?

emailed, hope theres one left with my name on it.

-Joe

quote Originally posted by joesfiero: emailed, hope theres one left with my name on it. -Joe

Joe;

I sent a paypal request. I have about 12 on hand yet.

------------------
Rodney Dickman

Fiero Parts And Acc's Web Page:
www.rodneydickman.com
Rodney Dickman's Fiero accessories
7604 Treeview Drive
Caledonia, WI 53108
Phone/Fax (262) 835-9575

bueller? bueller....?

quote Originally posted by americasfuture2k: is the bleeder an easy size to replace with a speed bleeder?

The threaded hole and the bleeder is the same size as OEM.

------------------
Rodney Dickman

Fiero Parts And Acc's Web Page:
www.rodneydickman.com
Rodney Dickman's Fiero accessories
7604 Treeview Drive
Caledonia, WI 53108
Phone/Fax (262) 835-9575

Where are the new slaves located on your web site? I was going to use a credit card for the purchase.

quote Originally posted by Rodney: They will not be on my web page. I will have a new web page we are working on and they will be on my new web page (hopefully in a few weeks) . Once these 30 are sold it may be a few weeks or longer before I will have more. Call or email me.

I don't have a Getrag but:

If these are as good or better than the original 84 aluminum slave cyl that came on that year's muncie, you will get years and years and years of trouble free service from them. I changed from a Wagner cast iron slave cyl back to a used alum unit, and have had zero problems with it since installation in 2004.

I think this is going to be the best new product ever intorduced for our Fieros.

I got 2 of them from Rodney today & it's exciting to think of how many clutch problems these are going to save.

I haven't installed one yet, only bought a couple at this time to keep on the shelf for when I need them.

Thanks Rodney, You've outdone yourself on this one.

Archie

Untill rodney has a replacement for the V6 4 speed slave ,,use the 86 MR 2 piston a direct drop in.... it has 2 seals and only $10.00 for the rebuild kit,, use your old spring and the new MR 2 piston,, the 2 seal piston revived my old slave ..

Just get the MR2 slave rebuild kit from advance,, autozone and others ,,it is 1/3rd the price of the stock fiero rebuild kit ..

Thank you gtu300r

[This message has been edited by uhlanstan (edited 07-28-2009).]

I am so glad there are more left, I have sent payment and eagerly await years of trouble free use.

quote Originally posted by Archie: I think this is going to be the best new product ever intorduced for our Fieros. I got 2 of them from Rodney today & it's exciting to think of how many clutch problems these are going to save. I haven't installed one yet, only bought a couple at this time to keep on the shelf for when I need them. Thanks Rodney, You've outdone yourself on this one.

^ And I totally agree!!

-Joe

quote Originally posted by teleotti_GT: can it be that this question is just open? And what is with the master cylinder, can I use for the stock clutch system DOT 4 or 5.1? thanks

They have told me the seals may not be compatable with DOT 5 and 5.1. This is only because they have not done any testing with these new fluids.
------------------
Rodney Dickman

Fiero Parts And Acc's Web Page:
www.rodneydickman.com
Rodney Dickman's Fiero accessories
7604 Treeview Drive
Caledonia, WI 53108
Phone/Fax (262) 835-9575

[This message has been edited by Rodney (edited 07-31-2009).]

My new Rodney slave came in today. Now on to the install... Thanks Rodney.

Mine should be here tomorrow or sat

Any idea if 1 of these would work with a custom-length slave cylinder pushrod? Also, I'd like to buy 1 sometime for my 88GT .

------------------