Hey guys/gals
Were having a meet Feb. 15th at Quaker Steak and Lube in Charlotte.I do not know the address but can probably find out but this is the road name it is on and the time Speedway Blvd / Bruton Smith Blvd around 1pm.Hope to see some of you in Feb.

------------------
Korey "Plastic Makes It Possible"
86 Pontiac Fiero SE gold on black options incl luggage rack,power windows,power door locks,sunroof,4 spd,body colored wheels
86 Buick Grand National bone stock
93 GMC Typhoon #1710 black on black bone stock
61 Ford Falcon 6 cylinder all stock project car
72 Simplicity Sovereign Garden Tractor

bump

i would consider going if it was not so close to the South Carolina Fiero Club meet date of feb 28th in Myrtle Beach. If any of you who live on the eastern part of nc wanna come down for a fun time, please feel welcome

I think I heard something go "bump" in the night....

Here's the deal...
I am scheduled to work that day, but I can trade days with someone to get it off. The trick is, if I do that and then the date changes, I will NOT be a happy camper. So...how sure are we of that date? The earlier I schedule it, the easier it will be to do....but also the more likely that things will change on the meeting plans.

With any luck...I will have the 84 on the road by then so I won't be showing up in a pickup truck again.

Its been awhile since I bumped this to the top

Making sure this is right... I'll be making an attempt to get there at the right time, place.

Date: 15th Feb 2009
Time: 1PM
Location: 7731 Gateway Ln, Concord, NC

quote Originally posted by Emc209i: Making sure this is right... I'll be making an attempt to get there at the right time, place. Date: 15th Feb 2009 Time: 1PM Location: 7731 Gateway Ln, Concord, NC

Correct

I think I have secured the day off.....someone else needed Saturday off so we are swapping. I will definitely be there even if i have to call in sick....but I will be driving the pickup again rather than the Fiero.

Wussup... I have a hollow catalytic converter that I'm about to chuck, but I'll give it to anyone who's at the meeting Sunday. Other wise, me and a certain dumpster have a play date.

https://www.fiero.nl/forum/Forum4/HTML/045643.html
Speak now or forever hold your piece.

quote Originally posted by Emc209i: Wussup... I have a hollow catalytic converter that I'm about to chuck, but I'll give it to anyone who's at the meeting Sunday. Other wise, me and a certain dumpster have a play date. https://www.fiero.nl/forum/Forum4/HTML/045643.html Speak now or forever hold your piece.

if its free i'll take it

I'm swapping cars this weekend, so I should have the fiero from here on out. (I can only park one car on campus). I'm going to try to make it back to Charlotte saturday night/sun morning. Hope to see you guys there.

quote Originally posted by Jncomutt: I'm swapping cars this weekend, so I should have the fiero from here on out. (I can only park one car on campus). I'm going to try to make it back to Charlotte saturday night/sun morning. Hope to see you guys there.

hope to see you there john

quote Originally posted by NCTyphoonKid: if its free i'll take it

I'll bring it then.

Anybody need anything off the Formula parts car? Tomorrow is the day for me to remove it if you need it.

I'd love to be there, but I'll be in Florida instead....bummer

Do you have the rear spindles off that formula?

quote Originally posted by Jncomutt: Do you have the rear spindles off that formula?

Rear suspension is going on my 86 SE, and front needs to stay on to make the care mobile....sorry.

Boats and hovercraft don't need spindles to stay mobile. Something to think about.

A hovercraft won't pass the inspection here in Wilkes County....they require you to have enough tread on your tires.

anybody want to meet up here at the house or on I-85?

Being I live 5 miles from the place, I'll probably just show up there with John. If not I'll post last minute.

Ok guys and gals everybody going to the meet info
We have reserved tables so please tell the Waiter/Waitress that you're with GM Turbo 6
Also we plan on being there around 12-12:30

I will try to make it tomorrow but it could easily be 12:30 or 1:00 PM before I get there since I have to drive from Columbia. Is the meet at 12:00 or 1:00?

Nelson

quote Originally posted by hnthomps: I will try to make it tomorrow but it could easily be 12:30 or 1:00 PM before I get there since I have to drive from Columbia. Is the meet at 12:00 or 1:00? Nelson

The official time is 1pm but we were just going to get there early

I guess we'll see ya'll there about 1pm

I won't be able to make it, and I live all of 10 minutes away I have to get some server stuff done for the track, and check out a switch at the drag strip. Might try to swing by and say hi, but not sure if I will be able to.

Let me know how it goes everyone, and have fun

Ken~

That damn spec clutch let me down. I went to leave last night and something with the clutch disc/pressure plate gave out. I didn't get a chance to tear it apart but something is definitely binding up. The clutch pedal got rock hard and its making a grinding noise. Fortunately I was only about 5 minutes from my house when it happened. I had to drive the car back home with no clutch, what a PITA. 1600 miles of driving the past 3 days for nothing, lol.

quote Originally posted by Jncomutt: That damn spec clutch let me down. I went to leave last night and something with the clutch disc/pressure plate gave out. I didn't get a chance to tear it apart but something is definitely binding up. The clutch pedal got rock hard and its making a grinding noise. Fortunately I was only about 5 minutes from my house when it happened. I had to drive the car back home with no clutch, what a PITA. 1600 miles of driving the past 3 days for nothing, lol.

John
I'm sorry to hear that about your car maybe you can make the next one
Pics will be posted soon
Korey

In. More to come.




























------------------
1988 Pontiac Fiero -

[This message has been edited by Emc209i (edited 02-15-2009).]

How was it guys? I tried to convince the wife to come down with me but she didn't want to and I decided I wanted to watch the Daytona race instead. Let's see the pics...

Two Fieros and a lot more GM turbo V6 vehicles. It was a decent afternoon but we need more Fieros at what was ostensibly a Fiero meeting.

quote Originally posted by hnthomps: Two Fieros and a lot more GM turbo V6 vehicles. It was a decent afternoon but we need more Fieros at what was ostensibly a Fiero meeting.

I'd like to see more come out I would love to get my fiero to a meet other than here at the house but I don't have a license and my car has no plates

Haha! Ballar. I'll post up some more pics after dinner.

quote Originally posted by Emc209i: Haha! Ballar. I'll post up some more pics after dinner.

Hey wasn't this on a stock exhaust

Yes it was. Stock Formula exhaust. You might have to grind out the ends to get it to slip or mate well with your pipes.

quote Originally posted by Emc209i: Yes it was. Stock Formula exhaust. You might have to grind out the ends to get it to slip or mate well with your pipes.

Ok I got the old one out