Well the moulds are getting made as we speak and I have decided to release them to you guys here before my site and Ebay. The price is $280 a set delivered to anywhere in the USA or Canada. They are quality hand laid fibreglass and come in primer ready for painting. Be one of the first to own these great new scoops! Here are some pics of the final plugs before they went to my glass guys yesterday for the moulds to be made.
Damn Aus, If I wasnt a poor 18year old I would buy some lol. I love the stage 2's but those (stage 3) are WAY WAY better IMHO, Hopefully I can get some before the 20th. Awesome Job
Adam
------------------
-Blown 2.8 -Undergoing engine swap to a new 2.8 -Have the 2.8 Block, have the oil pump, water pump, and all my gaskets -Needs: Starter, Heads Redone, Ported Manifolds, WCF Intake, ARI Phase 2 Cam, Spintek Muffler, Mr Mikes Seats =)
[This message has been edited by Arizona85GT (edited 04-01-2003).]
Impressive...I can't say whether or not i like them more than Stage II but they are sweet. If I didn't have all my money invested in V8 Archie.com(Smile) I would definetely get them at that price. Nathan
IP: Logged
12:31 AM
scrotum_pat Member
Posts: 737 From: Eldridge,Iowa,USA Registered: Feb 2002
You should make me smaller so they can go in front of the doors, know what I mean? It would look real good w/ my mecham scoops P.S. Ill buy some if you make me for the front fender deally.
IP: Logged
04:42 AM
Monster Member
Posts: 281 From: Silver Spring, MD Registered: Jan 2003
Aus - These look great! Just ordered my Stage 2s in the group buy & now you're tempting me to part with even more money. I think that these would look awesome on my 87 notchie daily driver but I have a practical concern...is there any grill provided or a provision for one? I've seen cases of "gifts" being left in the scoops of other vehicles where I park & these look so nice & wide open that they may be too much of a temptation for some of these low life jokers.
And...what about some matching front fender vents???? How's that hood vent coming??? I'd love to do it all so that I can get her properly repainted
Aus, do you have a photo of them with the SE/GT effects on the lower portion? Could you photoshop it? I really like these, but I would want to put the effects on...it might ruin the look...?
IP: Logged
10:12 AM
PFF
System Bot
$Rich$ Member
Posts: 14575 From: Sioux Falls SD Registered: Dec 2002
Aus, do you have a photo of them with the SE/GT effects on the lower portion? Could you photoshop it? I really like these, but I would want to put the effects on...it might ruin the look...?
Ditto!!
IP: Logged
10:53 AM
onfire Member
Posts: 1560 From: Maple Valley, WA Registered: Oct 2000
So Aus, did you base the front of AUS Fiero in your sig after Trick Flow's?
------------------ --Adam-- 1987 Blue GT 5-speed IM AOL: FieroGT5speed 16 years old and already selling my stuff to pay for repairs to my Fiero...which i sold my stuff to buy in the first place
[This message has been edited by GTFiero1 (edited 04-01-2003).]
IP: Logged
04:22 PM
4mulaFire Member
Posts: 399 From: North Platte, NE Registered: Mar 2003
I wish you had these out before I painted the car...
------------------
85 GT 4 SPD Number 53715 of 76371 Best 1/4 15.816 @ 84.72
Accel 8.8mm wires, Accel 300+ Ignition box, Blaster Coil, NGK UR5, K&N, Short Shifter, High flow cat, Monochrome Caracus red.
COMING SOON: KYB shocks and struts, ST lowering springs, Motegi M12 16X7 rims, Poly Dogbone, Ported exhuast manifolds, and YOKO AVS ES100 tires 205/55/16 front and 225/50/16 rear
Coulee Region Fieros member(couleefiero.tripod.com)
IP: Logged
06:10 PM
Fierochic88 Member
Posts: 4987 From: Staunton, VA Registered: May 2001
That is very very close to how they would look on a car with aero trim. The fender vents are coming soon. Development of parts costs big dollars in time and materials so there is only so much I can do at once. For grills they can simply be glued on from behind. I will not be supplying them as when I used to for Stage 2s no one used them, they just threw them away and used different mesh. Also I have no good mesh suppliers here.
IP: Logged
06:50 PM
AusFiero Member
Posts: 11513 From: Dapto NSW Australia Registered: Feb 2001
Wow - Those are almost exactly what I have had in mind for awhile... and now you're going to make me spend money. I hope you're ashamed of yourself, Aus !
IP: Logged
07:07 PM
PFF
System Bot
DanFiero Member
Posts: 2817 From: Cedar Rapids, Iowa Registered: Jul 2002
Aus, I would like to order a pair for my husband. Could you email me the details on how to pay and where to send the money, and how you want payment. dtmoffatt@msn.com
Thanks, DanFiero's wife
IP: Logged
07:31 PM
Monster Member
Posts: 281 From: Silver Spring, MD Registered: Jan 2003
Aus - how about posting some payment/order info or a link...or should we just handle it via email/paypal?
Thanks for the update on the grill situation - I wasn't thinking of a mesh but more along the line of some parallel bars. I think a mesh would be too visable but some bars (Black) parallel to the vents would fit in with the look real nicely...time to fabricate!
I will not be supplying them as when I used to for Stage 2s no one used them, they just threw them away and used different mesh. Also I have no good mesh suppliers here.
AUS- I will be using the mesh you sent with the scoops. I just figured that shouldn't really take the time to glue them in before I actually get around to painting the panels
IP: Logged
12:22 PM
KissMySSFiero Member
Posts: 5559 From: Tarpon Springs, FL USA Registered: Nov 2000
Is the piece you supply the complete fender? Or is it just a vent you bond into your existing fender?
thanks
I haven't got that far yet. Bit a complete fender probably isn't going to sell due to cost and a vent to mould in would be too hard. I am thinking maybe a lower fender replacement section that you attach by cutting off the bottom of a factory fender and rivetting the new section onto the old fender under the side trim.
Well the moulds are getting made as we speak and I have decided to release them to you guys here before my site and Ebay. The price is $280 a set delivered to anywhere in the USA or Canada. They are quality hand laid fibreglass and come in primer ready for painting. Be one of the first to own these great new scoops! Here are some pics of the final plugs before they went to my glass guys yesterday for the moulds to be made.
Please let me know when these will be ready and as soon as we get our Formula safely home from PA, I will be looking to get a set of the Stage 3 scoops. Thanks.
------------------ Elvira President, New England Fiero Association (NEFA) www.dirtyratracing.org Blue 87GT 5sp (TruBlu) Black 86GT 5sp (The Dirty Rat) 87 GT 4-seater (2+2) Maroon 88 T-top Formula (Fun-In-The-Sun) 85 GT autocrosser (Auto-X)
IP: Logged
09:40 PM
FieroHarry Member
Posts: 1809 From: Virginia Beach VA Registered: Apr 2001
Originally posted by Red86SEautox: Aus, I'm very interested in these. Do you have the ability to predrill the lower portion of the panels for correct fitting of the GT effects?
No. I would need jigs to do that in a mass production situation. You would be better doing it by measuring off your existing panels as to where to put the holes.
I'm not worried about where to put the holes, but cracking the panels. What would be the best way to make the holes? A standard drill with a regular bit?
IP: Logged
11:18 PM
AusFiero Member
Posts: 11513 From: Dapto NSW Australia Registered: Feb 2001
Wow - Those are almost exactly what I have had in mind for awhile... and now you're going to make me spend money. I hope you're ashamed of yourself, Aus !
Nope, not at all
IP: Logged
01:10 AM
Apr 6th, 2003
FieroMaster88 Member
Posts: 7680 From: Mattawan, MI Registered: Nov 2000
Wow! I am going to have to show Jordan these babies. I think these would look sweet on his lime green Fast and Furious Fiero
I am not at a computer today with photoshop capabilities. Anyone have the ability to change those to Jordans lime green Fiero color so he can get a better idea of what they look like?
!
