First
◄
Page 1 of 1
►
Last
Goto
I need a bolt thread size and length. by AL87
Started on : 02-09-2012 07:12 PM
Replies : 5
Last post by : dudewithoutfiero on 02-10-2012 08:50 PM
Feb 9th, 2012
AL87 Member Posts: 2578 From: Bradenton, Florida, United States Registered: Mar 2010
I need to know what the thread size and length is for a bolt that couples the exhaust manifolds to the y-pipe. I had to cut the originals up as they were rusted in place during tear down. and they have been long thrown away. nothing in my stock fits, so I have to go buy new ones. help, please?
IP: Logged
07:12 PM
PFF
System Bot
jetman Member Posts: 7788 From: Sterling Heights Mich Registered: Dec 2002
I thought those were 8MM x 1.25 pitch x 25MM long. Let's see if someone else can chime in here and confirm that my memory is still good.
IP: Logged
07:34 PM
AL87 Member Posts: 2578 From: Bradenton, Florida, United States Registered: Mar 2010
I thought they were 8x1.25mm thread too but my manifolds thread seem a bit more course. like 8x1mm. I thought length was anywhere from 30-40mm. Im not talking about the exhaust manifold bolts that bolt it to the block, but the ones that bolt the y/crossover pipe to the manifolds. thanks.
IP: Logged
07:42 PM
Bloozberry Member Posts: 7760 From: Registered: Jan 2009
The P22 says they are M8 X 1.25 X 50 (10.9)
IP: Logged
10:01 PM
Feb 10th, 2012
fgt1988 Member Posts: 724 From: FL Registered: Jan 2005
The Fiero store carry them if you don't want to guess and wait
IP: Logged
08:21 PM
dudewithoutfiero Member Posts: 1191 From: Cape Coral, Fl Registered: Jul 2005
they are indeed 8mx1.25. not sure of length, i just eye balled them to find the right size with a old one that was still good
IP: Logged
08:50 PM
First
◄
Page 1 of 1
►
Last
Goto
T H I S I S A N A R C H I V E D T O P I C
Contact Us | Back To Main Page
Advertizing on PFF | Fiero Parts Vendors PFF Merchandise | Fiero Gallery | Ogre's Cave
Real-Time Chat | Fiero Related Auctions on eBay
Copyright (c) 1999, C. Pennock