Pennock's Fiero Forum
  Technical Discussion & Questions - Archive
  thread size for shifter

T H I S   I S   A N   A R C H I V E D   T O P I C
  
Email This Page to Someone! | Printable Version
thread size for shifter by 86GTBen
Started on: 07-28-2011 12:24 AM
Replies: 1
Last post by: 86GTBen on 07-28-2011 12:47 AM
86GTBen
Member
Posts: 401
From: finksburg, MD, North america
Registered: May 2009

Feedback score: (5)
Leave feedback

Rate this member
Report this Post07-28-2011 12:24 AM Click Here to See the Profile for 86GTBenSend a Private Message to 86GTBenDirect Link to This Post
anyone know where i can find the thread size for the shifter? i am makeing a shift knob for myslelf and need to put a nut on the inside. its 5/8 but i dont know the thread size
IP: Logged
PFF
System Bot
86GTBen
Member
Posts: 401
From: finksburg, MD, North america
Registered: May 2009

Feedback score: (5)
Leave feedback

Rate this member
Report this Post07-28-2011 12:47 AM Click Here to See the Profile for 86GTBenSend a Private Message to 86GTBenDirect Link to This Post
16 mm x 1.5 mm.


never mind found it
IP: Logged



All times are ET (US)

T H I S   I S   A N   A R C H I V E D   T O P I C
  

Contact Us | Back To Main Page

Advertizing on PFF | Fiero Parts Vendors
PFF Merchandise | Fiero Gallery | Ogre's Cave
Real-Time Chat | Fiero Related Auctions on eBay



 Copyright (c) 1999, C. Pennock