I am missing a bolt and I don't know what size it is. I have an 85 v6 gt 2.8 4 speed. Ill try to explain where its located maybe someone can help. The top motor mount which connects to the dog bone is the part I'm looking at. If you follow the mount from the dog bone toward the front of the car it sweeps down over the pullies. There are two bolts holding the mounting bracket to the engine. The bolt behind the thermostat housing or directly above the top pulley is missing. Does anyone know what size it is and thread type so I can buy another one.

The first bolt is a 10mm x 1.50 x 2.25 inches. The second one is the same but has a studded head and holds a wire harness strap.

------------------

MINNESOTA MAFIA Real men get blown
87 GT MP-112 powered, 3800 Supercharged on 19's 372 rwhp & tuning____88 GT T-top 1 of very few, 000,130.4 miles
87 GT custom______90 Grand prix STE Turbo_____98 ZX750R
Nitrous is like a hot chick with an STD, Ya want to hit it, but are afraid of the consequences.
IF YOU AIN'T BREAKING STUFF..................IT AIN'T MODDED ENOUGH
If your'e not living on the edge..........you're taking up too much room.
Best Fiero mounts available Best Fiero mounts available

I tried that size and it doesn't fit. any other suggestions. The bolt is at the passenger side of the engine where the intake manifold meets the engine block right above the pulley. The bolt that im looking for holds the upper motor mount bracket to the engine. any other ideas???

Problem solved thank