Pennock's Fiero Forum
  Technical Discussion & Questions - Archive
  g6 6speed shifter part number???

T H I S   I S   A N   A R C H I V E D   T O P I C
  

Email This Page to Someone! | Printable Version


g6 6speed shifter part number??? by gpchris
Started on: 04-09-2008 08:44 PM
Replies: 4
Last post by: gpchris on 04-10-2008 12:48 PM
gpchris
Member
Posts: 44
From: Crown Point, Indiana
Registered: Sep 2007


Feedback score: N/A
Leave feedback

Rate this member

Report this Post04-09-2008 08:44 PM Click Here to See the Profile for gpchrisSend a Private Message to gpchrisDirect Link to This Post
is this the shifter??

partnumber: 15296500

http://www.gmpartsdirect.co...&partnumber=15296500
IP: Logged
PFF
System Bot
gpchris
Member
Posts: 44
From: Crown Point, Indiana
Registered: Sep 2007


Feedback score: N/A
Leave feedback

Rate this member

Report this Post04-10-2008 12:39 AM Click Here to See the Profile for gpchrisSend a Private Message to gpchrisDirect Link to This Post
Nevermind that is it.

This images is larger than 153600 bytes. Click to view.
IP: Logged
Joseph Upson
Member
Posts: 4951
From:
Registered: Jan 2002


Feedback score: (2)
Leave feedback





Total ratings: 88
Rate this member

Report this Post04-10-2008 07:59 AM Click Here to See the Profile for Joseph UpsonSend a Private Message to Joseph UpsonDirect Link to This Post
 
quote
Originally posted by gpchris:

Nevermind that is it.

This images is larger than 153600 bytes. Click to view.


That's not all of it despite what you see in the assembly picture for that price. For example, the shift knob alone costs about $80 so you can be certain you will not receive a complete assembly for under that price. Call GM parts direct to confirm what you will actually get with that part number. Also that shifter will only be of use to you if you are looking to swap the 6 speed into a front wheel drive car, it will not fit in the stock Fiero console properly or easily if at all. I sold two last year.
IP: Logged
jscott1
Member
Posts: 21676
From: Houston, TX , USA
Registered: Dec 2001


Feedback score:    (15)
Leave feedback





Total ratings: 415
Rate this member

Report this Post04-10-2008 11:15 AM Click Here to See the Profile for jscott1Send a Private Message to jscott1Direct Link to This Post
 
quote
Originally posted by Joseph Upson:

Also that shifter will only be of use to you if you are looking to swap the 6 speed into a front wheel drive car, it will not fit in the stock Fiero console properly or easily if at all. I sold two last year.


I believe even if you could get it to work the shift pattern would be upside down.

For a Fiero you have to use a modified V6 Muncie shifter.
IP: Logged
gpchris
Member
Posts: 44
From: Crown Point, Indiana
Registered: Sep 2007


Feedback score: N/A
Leave feedback

Rate this member

Report this Post04-10-2008 12:48 PM Click Here to See the Profile for gpchrisSend a Private Message to gpchrisDirect Link to This Post
Im actually putting it into a grand prix... I've been told thats for the shifter fully loaded minus the knob and boot.
IP: Logged



All times are ET (US)

T H I S   I S   A N   A R C H I V E D   T O P I C
  

Contact Us | Back To Main Page

Advertizing on PFF | Fiero Parts Vendors
PFF Merchandise | Fiero Gallery | Ogre's Cave
Real-Time Chat | Fiero Related Auctions on eBay



Copyright (c) 1999, C. Pennock