Pennock's Fiero Forum
  Technical Discussion & Questions - Archive
  Axle socket size?

T H I S   I S   A N   A R C H I V E D   T O P I C
  

Email This Page to Someone! | Printable Version


Axle socket size? by jimbolaya
Started on: 02-23-2008 07:43 PM
Replies: 5
Last post by: 3084me on 02-23-2008 11:11 PM
jimbolaya
Member
Posts: 10652
From: Virginia Beach, Virginia
Registered: Feb 2007


Feedback score: N/A
Leave feedback





Total ratings: 114
Rate this member

Report this Post02-23-2008 07:43 PM Click Here to See the Profile for jimbolayaClick Here to Email jimbolayaSend a Private Message to jimbolayaDirect Link to This Post
What's the axle nut socket size? I need to pull mine. My buddy is no longer here to borrow from so I need to go buy one. I believe it's 30mm, correct?

Jim
IP: Logged
PFF
System Bot
RWDPLZ
Member
Posts: 14382
From: Michigan
Registered: May 2002


Feedback score:    (11)
Leave feedback





Total ratings: 295
Rate this member

Report this Post02-23-2008 07:44 PM Click Here to See the Profile for RWDPLZClick Here to visit RWDPLZ's HomePageSend a Private Message to RWDPLZDirect Link to This Post
Yep, 30mm

------------------

1984 Fiero SE

IP: Logged
jimbolaya
Member
Posts: 10652
From: Virginia Beach, Virginia
Registered: Feb 2007


Feedback score: N/A
Leave feedback





Total ratings: 114
Rate this member

Report this Post02-23-2008 07:46 PM Click Here to See the Profile for jimbolayaClick Here to Email jimbolayaSend a Private Message to jimbolayaDirect Link to This Post
Thanks, that didn't take long at all. New record for shortest thread ever.
IP: Logged
AlanD
Member
Posts: 366
From: Sparta, NC
Registered: Jul 2005


Feedback score: (1)
Leave feedback

Rate this member

Report this Post02-23-2008 07:52 PM Click Here to See the Profile for AlanDClick Here to Email AlanDSend a Private Message to AlanDDirect Link to This Post
Should have called. I have the socket here for it.
Al
IP: Logged
jimbolaya
Member
Posts: 10652
From: Virginia Beach, Virginia
Registered: Feb 2007


Feedback score: N/A
Leave feedback





Total ratings: 114
Rate this member

Report this Post02-23-2008 08:20 PM Click Here to See the Profile for jimbolayaClick Here to Email jimbolayaSend a Private Message to jimbolayaDirect Link to This Post
 
quote
Originally posted by AlanD:

Should have called. I have the socket here for it.
Al


Thanks Alan, but I need to have one anyway.

Jim

Doh! This is no longer the shortest thread ever.

IP: Logged
3084me
Member
Posts: 1034
From: Bucks County, PA
Registered: Apr 2005


Feedback score: (5)
Leave feedback

Rate this member

Report this Post02-23-2008 11:11 PM Click Here to See the Profile for 3084meSend a Private Message to 3084meDirect Link to This Post
My 85 used the 29mm size. Some Fieros used the 29mm size as well and some replacement axles also use the 29's. (just in case you find that the 30mm does not fit.

------------------
I'm not driving too fast, . . . I'm flying too low.

IP: Logged



All times are ET (US)

T H I S   I S   A N   A R C H I V E D   T O P I C
  

Contact Us | Back To Main Page

Advertizing on PFF | Fiero Parts Vendors
PFF Merchandise | Fiero Gallery | Ogre's Cave
Real-Time Chat | Fiero Related Auctions on eBay



Copyright (c) 1999, C. Pennock