Pennock's Fiero Forum
  Technical Discussion & Questions - Archive
  flange gasket, quick question

T H I S   I S   A N   A R C H I V E D   T O P I C
  

Email This Page to Someone! | Printable Version


flange gasket, quick question by Winkie
Started on: 02-05-2008 07:43 PM
Replies: 1
Last post by: buddycraigg on 02-05-2008 09:30 PM
Winkie
Member
Posts: 1159
From: bangor, PA
Registered: Feb 2007


Feedback score: (4)
Leave feedback

Rate this member

Report this Post02-05-2008 07:43 PM Click Here to See the Profile for WinkieClick Here to visit Winkie's HomePageSend a Private Message to WinkieDirect Link to This Post
First off I assume all 3 bolt flanges that have a 2.5" opening are the same size. Am I right? I was looking for gaskets and I am wondering, if I get a gasket with at 2.75" opening is that ok? If not I will order a different brand with a 2.5" opening.

Thanks for your time
Ryan
IP: Logged
PFF
System Bot
buddycraigg
Member
Posts: 13353
From: kansas city, mo
Registered: Jul 2002


Feedback score: (5)
Leave feedback





Total ratings: 475
Rate this member

Report this Post02-05-2008 09:30 PM Click Here to See the Profile for buddycraiggClick Here to Email buddycraiggSend a Private Message to buddycraiggDirect Link to This Post
well i dont know what you are doing. but
on my 350, if i got the blue metal wrapped ones, they would fail after 5,000 miles or so.
i got a slightly more expensive solid one that is about the same color as graphite, and it's held up for many years.

i think the biggest issues is you want the flanged parts to mesh with the doughnut
IP: Logged



All times are ET (US)

T H I S   I S   A N   A R C H I V E D   T O P I C
  

Contact Us | Back To Main Page

Advertizing on PFF | Fiero Parts Vendors
PFF Merchandise | Fiero Gallery | Ogre's Cave
Real-Time Chat | Fiero Related Auctions on eBay



Copyright (c) 1999, C. Pennock