Does anyone know if the pigtail for the injectors is still available from GM and if so what the part number is?

Thanks in advance everyone.

------------------

Bump for the morning crowd.

Does this help? -Jason

http://cgi.ebay.com/ebaymot...QQrdZ1QQcmdZViewItem

-OR-

http://cgi.ebay.com/ebaymot...QQrdZ1QQcmdZViewItem

a machine shop up the road from me has these on a shelf collecting dust. check out your local salvage yard, get a multimeter and test it out, do some solder touch ups and youll be on your way

Thanks guys, but I am hoping for a plug and play factory unit.

Plug and play? Are you asking about a wiring harness then?

try these guys

http://www.casperselectroni...&Category_Code=INJEC

------------------



" DRIVE IT LIKE YOU LOVE IT"

quote Originally posted by Ken_86gt: Plug and play? Are you asking about a wiring harness then?

Yes, I am looking for the whole pigtail that plugs in the main wiring harness. One with all 7 connectors for the injectors. I have heard that they don't do well in the heat on top of the engines and it might have something to do with a miss I am experiencing.

Thanks for the replies and the links. The Casper place above was very interesting but didn't have one either.

Is this what you are looking for?



here is the female end




here is the male end




If this is kinda what you are looking for, try this site http://www.texasindustriale...erpack_terminals.asp

I believe the part numbers to be WPTHFM6 and WPTHM6

Here is their home page http://www.texasindustrialelectric.com/home.asp

------------------



" DRIVE IT LIKE YOU LOVE IT"

[This message has been edited by ohio86se (edited 01-01-2008).]