Don’t skip any steps and answer all of the questions and we can get this wrapped up pretty quick.
With the motor attached to the headlight assembly. Start in the down position. Unplug the pigtail from the relay and the single blue wire Use jumper wires and apply Power to the green wire Ground to the gray wire Does the headlight come up? Does the knob stop spinning once the headlight is up? Watch the knob for about 60 seconds, does the knob twitch?
With the headlight in the up position Unplug the pigtail from the relay and the single blue wire Use jumper wires and apply Power to the blue wire Ground to the green wire. Does the headlight go down? Does the knob stop spinning once the headlight is down? Watch the knob for about 60 seconds, does the knob twitch?
