Pennock's Fiero Forum
  Technical Discussion & Questions - Archive
  3800 flywheel

T H I S   I S   A N   A R C H I V E D   T O P I C
  

Email This Page to Someone! | Printable Version


3800 flywheel by jsmfiero
Started on: 10-24-2007 01:20 AM
Replies: 3
Last post by: m0sh_man on 10-24-2007 12:07 PM
jsmfiero
Member
Posts: 24
From: omaha
Registered: Apr 2007


Feedback score: N/A
Leave feedback

Rate this member

Report this Post10-24-2007 01:20 AM Click Here to See the Profile for jsmfieroClick Here to Email jsmfieroSend a Private Message to jsmfieroDirect Link to This Post
i am wanting to put a getrag on my sc3800 and am wondering if ill need a new flywheel, i think i remeber hearing to use the camaro 5 spd flwheel but am not sure
IP: Logged
PFF
System Bot
IXSLR8
Member
Posts: 668
From: East Happy Valley, OR, USA
Registered: Sep 2004


Feedback score: (1)
Leave feedback

Rate this member

Report this Post10-24-2007 02:00 AM Click Here to See the Profile for IXSLR8Click Here to Email IXSLR8Send a Private Message to IXSLR8Direct Link to This Post
You can buy the camaro flywheel, buy a flywheel from various suppliers such as West Coast Fieros, or have your existing flywheel plugged, redrilled to the 3800 bolt pattern and resurfaced.
IP: Logged
darkhorizon
Member
Posts: 12225
From: Flint Michigan
Registered: Jan 2006


Feedback score: (1)
Leave feedback





Total ratings: 450
Rate this member

Report this Post10-24-2007 12:03 PM Click Here to See the Profile for darkhorizonSend a Private Message to darkhorizonDirect Link to This Post
.

------------------
[16:58] davepettinelli: mine's got a court-apponted psychiatrist
[16:58] davepettinelli: yay girls
[16:59] GTPimpin: mine whines alot
[16:59] GTPimpin: her name is fiero


Ultimate 3800 swap thread

IP: Logged
m0sh_man
Member
Posts: 8428
From: south charleston WV 25309
Registered: Feb 2002


Feedback score:    (23)
Leave feedback





Total ratings: 162
Rate this member

Report this Post10-24-2007 12:07 PM Click Here to See the Profile for m0sh_manClick Here to Email m0sh_manSend a Private Message to m0sh_manDirect Link to This Post
i bought a flywheel for a 1996+ 3800 v6 camaro/firebird, took it to a machine shop had it turned down to .85" from the crankshaft face to the clutch face, its .85" then i gave them the flexplate from the donor motor and told them to match the balance between the flexplate and the flywheel.

most shops around here charge between $100-200 to do this service

matthew
IP: Logged



All times are ET (US)

T H I S   I S   A N   A R C H I V E D   T O P I C
  

Contact Us | Back To Main Page

Advertizing on PFF | Fiero Parts Vendors
PFF Merchandise | Fiero Gallery | Ogre's Cave
Real-Time Chat | Fiero Related Auctions on eBay



Copyright (c) 1999, C. Pennock