Pennock's Fiero Forum
  Technical Discussion & Questions - Archive
  '88 Northstar E-brake??

T H I S   I S   A N   A R C H I V E D   T O P I C
  

Email This Page to Someone! | Printable Version


'88 Northstar E-brake?? by HTXtremes
Started on: 10-08-2007 12:09 AM
Replies: 3
Last post by: Russ544 on 10-08-2007 10:48 AM
HTXtremes
Member
Posts: 345
From: Mansfield, AR
Registered: Sep 2007


Feedback score: (2)
Leave feedback

Rate this member

Report this Post10-08-2007 12:09 AM Click Here to See the Profile for HTXtremesSend a Private Message to HTXtremesDirect Link to This Post
Question for our Northstar installers. What have you been doing to maintain the E-brake on the '88 fieros? Because the cables run through the front cross member. Any ideas on this might help others as well!

------------------
'88 Coupe (extensive mods underway)
//www.fiero.nl/forum/Forum2/HTML/086359.html

IP: Logged
PFF
System Bot
htexans1
Member
Posts: 9110
From: Clear Lake City/Houston TX
Registered: Sep 2001


Feedback score: N/A
Leave feedback





Total ratings: 118
Rate this member

Report this Post10-08-2007 12:23 AM Click Here to See the Profile for htexans1Send a Private Message to htexans1Direct Link to This Post
 
quote
Originally posted by HTXtremes:

Question for our Northstar installers. What have you been doing to maintain the E-brake on the '88 fieros? Because the cables run through the front cross member. Any ideas on this might help others as well!



Only a section of the front cross member has been cut from what I had seen.... However all I seen were auto N* conversions. Im sure crazyone Mr. Fiero or PBJ can chime in haere as they have completed at least one (or owned) a Northstar Fiero. (Mine is a pile of parts yet.)

------------------
1988 Fiero Formula T-tops
CJB 143 of 1252 "factory T-top cars"

IP: Logged
Zac88GT
Member
Posts: 1024
From: Victoria BC
Registered: Nov 2004


Feedback score: N/A
Leave feedback

Rate this member

Report this Post10-08-2007 01:48 AM Click Here to See the Profile for Zac88GTClick Here to visit Zac88GT's HomePageSend a Private Message to Zac88GTDirect Link to This Post
I just welded tabs onto the bottom of my new front crossmember for the ebrake mounts. I'll take some pictures tomarrow.
IP: Logged
Russ544
Member
Posts: 2136
From: S.W. Oregon
Registered: Jun 2003


Feedback score: (3)
Leave feedback





Total ratings: 86
Rate this member

Report this Post10-08-2007 10:48 AM Click Here to See the Profile for Russ544Send a Private Message to Russ544Direct Link to This Post
about 1/2 way down this page //www.fiero.nl/forum/F...2/HTML/054893-7.html you'll see where I fabricated brackets on the new crossmember.

Russ544
IP: Logged



All times are ET (US)

T H I S   I S   A N   A R C H I V E D   T O P I C
  

Contact Us | Back To Main Page

Advertizing on PFF | Fiero Parts Vendors
PFF Merchandise | Fiero Gallery | Ogre's Cave
Real-Time Chat | Fiero Related Auctions on eBay



Copyright (c) 1999, C. Pennock