First
◄
Page 1 of 1
►
Last
Goto
Thread size of the dust cover bolts by sspeedstreet
Started on : 06-25-2007 04:33 PM
Replies : 3
Last post by : sspeedstreet on 06-26-2007 12:28 PM
Jun 25th, 2007
sspeedstreet Member Posts: 2306 From: Santa Maria, CA Registered: Dec 2002
Trying to reinstall the lower dust cover shield on my '88 Getrag. There are four bolts that hold it in place. At a glance I thought they were 6mm standard thread, but they don't fit. Darned if I can remember what I took out when disassembling it. Somebody help me here? Thanks
IP: Logged
04:33 PM
PFF
System Bot
revin Member Posts: 8684 From: Pville, TX Registered: Aug 2001
I think they are a 10mm???
IP: Logged
04:40 PM
sspeedstreet Member Posts: 2306 From: Santa Maria, CA Registered: Dec 2002
Don't think so. A 6mm tries, but but acts the thread pitch is wrong.
IP: Logged
05:52 PM
Jun 26th, 2007
sspeedstreet Member Posts: 2306 From: Santa Maria, CA Registered: Dec 2002
They're the pointed sheet metal type used to hold components to the firewall, etc. Thanks for the outpouring of help.
IP: Logged
12:28 PM
First
◄
Page 1 of 1
►
Last
Goto
T H I S I S A N A R C H I V E D T O P I C
Contact Us | Back To Main Page
Advertizing on PFF | Fiero Parts Vendors PFF Merchandise | Fiero Gallery | Ogre's Cave
Real-Time Chat | Fiero Related Auctions on eBay
Copyright (c) 1999, C. Pennock