Originally posted by topher_time:
Best I can do, but I'll do a little more digging. Alldata sucks, but I've got unlimited access. I love my job
Number 85-10-2 Date 7/86
Subject: FIERO DOOR TRIM PAD REPAIR
1985 FIERO WITH MANUAL REMOTE T-SIDE REAR VIEW MIRROR
SOME 1985 FIEROS EQUIPPED WITH MANUAL REMOTE MIRROR MAY EXPERIENCE A SAG IN THE DOOR TRIM PANEL AT THE REMOTE MIRROR CONTROL LOCATION. THIS CONDITION CAN BE CORRECTED BY ADDING A REINFORCEMENT TO THE BACK OF THE TRIM PANEL AS FOLLOWS:
1. REMOVE DOOR TRIM PANEL AND PLACE TRIM SIDE DOWN ON CLEAN WORK SURFACE.
2. FROM A PIECE OF ALUMINUM APPROXIMATELY .020-.025 THICK, CUT A SECTION TO FIT ACROSS THE SAG AREA ON THE TRIM PANEL.
3. USING 3M STRUCTURAL ADHESIVE, 8101 OR EQUIVALENT, BOND REINFORCEMENT TO THE TRIM PANEL. IT MAY BE NECESSARY TO CLAMP REINFORCEMENT FOR INITIAL SET-UP.
4. REINSTALL TRIM PAD.
LABOR OPERATION: T1173
LABOR TIME : .8 HOURS
