I was wondering if anybody had installed a heads up display in a fiero and made it work. I did a search but couldnt find a thread that showed a completed one. there where a couple that showed pics but no information on how it was done or some had lots of wiring info but info on what car it came out off. Any help or ideas??

Yes, but! I have an HUD, but it was not from another car. The sending unit was made by a Fiero owner and shows only mph. Because of the location of the sending unit, my installation is the only one of its kind I know of that actually works. The angle of the windshield and the need to locate the sending unit inside the back of the dash cluster requires the reflection to return to your eye level by use of a blackened piece of small (1"x1") glass located at the base of the windshield. I will get photos to you via email, as PIP in a pain in the a$$ sometimes. Ed

------------------

Here's one you can make:

http://www.fieros.de/en/projects/hud.html

------------------
www.FieroDomain.com
Over 120 Fiero Links, Articles, Images, Diagnostics

"If any car is both the parade and the rain, it is the Fiero"