Anybody out their got a idea on what year make and model ,to get a set of transmission mount for my 44t4/4t60 im putting in my 87 gt .will they bolt right up ,do i need to make somthing.
I got the conversion information from karl hamilton here on the forum ,but he was not specific on what year

anybody out their

I think it's a pontiac 6000.... There's a webpage out there....I think I have a link at home. I'll try to find it.

------------------
Dana Mitchell
Member of the Gateway Fiero Club
86 SE Red w/ Black 3.2L w/ T-440, 87 GT Maroon w/ Silver Auto, 87 GT Blue w/ 5-Speed
95 Impala SS, 95 Roadmaster Estate Wagon w/ Air Ride (In Paint)
07 Silverado Classic Crew Cab 5.3L, 06 HHR (wife's ride), 91 CBR1000F

Thanks ,please look for the website for me .

check out rockcrawl site.
when i did my 4.9 4t60 package i believe i used the stock 125 mounts.
been a year 1/2 and holding up well..
l8r clynt

http://spacecoastfieros.com/tech/440%2D4T60/

You may also want to take a look at my site where I have this build going located at http://64.17.190.253/1987_gt.htm as well as one that is on page three of the current technical issues located at https://www.fiero.nl/forum/Forum2/HTML/071642.html

Lots of info on both engine and trans mounts and all of the other problems associated with this build.

Nice site Andy, keep it updated as it's in my favorites.

Ryan

------------------

1986 Fiero2m8 (LT1 NX / 4T60 Roadster Build)
https://www.fiero.nl/forum/Forum2/HTML/071642.html

You need GM P/N 1405547 and NAPA P/N 620-1103 for the forward mount and GM P/N 14077768 and NAPA P/N 6230-1103 for the rear mount. That said ,you may find some of the existing 3 speed automatic parts are the same; I do not re-use "old" parts whenever possible!!. Dewey