The local junk yard has a 4.9 valve cover,(oil fill side)...for $20 I was going to swap the one I have over if it will work but can I have one on both sides?I know the back may be hard to see but for the price? I would have a matching pair.Will it work or will it not clear somewhere?
Thanks,Paul

------------------
GOD,Family and Cars...And in that order...

Click here to see my 85,a work in progress.
http://members.cardomain.com/windsweptfiero

Yes, you can have an oil fill on both sides. You need to be a bit creative to duct the air into crankcase inlet side that goes into the carb bonnett, but other than that it just bolts right on.

John Stricker

20 bucks for a valve cover is legal robbery. Maybe a 5 buck item....Haggle a little.

------------------
Calgary - August 1, 2004 Fiero Fiesta
1984 Indy Fiero 3.4/3100 Hybrid NA
*ALL THROTTLE AND NO BOTTLE*

I always thought this place was HIGH....

I hate to support a car place that rips car guys off....

So does anybody have one to offer?

------------------
GOD,Family and Cars...And in that order...

Click here to see my 85,a work in progress.
http://members.cardomain.com/windsweptfiero

The covers are about $65 new from GM. They're cast and finned with engraving on them. If I hadn't already had 2, I'd have paid the $20 for one.

John Stricker

quote Originally posted by donk316: 20 bucks for a valve cover is legal robbery. Maybe a 5 buck item....Haggle a little.

Are you talking about the PVC or can you explain?

quote Originally posted by jstricker: Yes, you can have an oil fill on both sides. You need to be a bit creative to duct the air into crankcase inlet side that goes into the carb bonnett, but other than that it just bolts right on. John Stricker