I recently contacted Ram Clutches to determine if the 9.75 HD clutch offered by the Fiero Store was a standard offering and to determine if a better clutch was recommended for use with a street driven , 240 HP max 4.9 Fiero conversion using the 3.65 Muncie 4 spd.
The following was the reply received. It is apparent that Ram considers this clutch to be proprietary to the Fiero Store only. However, for those who have previously purchased this clutch, it would be interesting to know any part numbers stamped on the pressure plate and disc.
Kerry,
Thanks for the inquiry. The setup in the description you provided is a
special unit we do for the Fiero Store, and should be correct for the
application you are looking for.
Thanks,
Mike Norcia
RAM Clutches
www.ramclutches.com