Today I picked up a dual TB intake from a 2.4L 24V Intrepid. Very neat set up but very wide. I am going to make a adapter to fit it on my V6 and see if there is any improvement. Updates when I have them. Going to work on it over the weekend with my spare intake.

------------------
85 GT 4 speed 2.8L auto X'er

excellent, let us know how it goes

------------------

thats great, i wanna see pics.

but in all reality, i think that for the time / effort involved, you could spend $130 and get a 57mm TB from Darrel Morse, and ported upper plenum and call it good

Cool! Are using just the throttle body or the complete Intrepid plenum as well? Post pics!

I have one of this but it's on an interpid R/T motorsports edition ~!!!!
hehe

Going to try and mount the upper part onto the Fiero intake. For the $25 it cost I figured id give it a shot. Thats $25 canadian

[This message has been edited by red85gt (edited 03-05-2004).]

Do try it, those board-out TB's and pleiums from what I've read and seen ent worth the bucks. They just can't increase the CFM enough. And where's the pics?

Ill see if I can borrow a pic off ebay I dont own a camera .

You sure it's a 2.4l? I always thought the dual tb's came on the 3.2l. That's the only place I see them.

------------------
A coward dies a thousand deaths..................A soldier dies but once.

Red 86 SE
Yellow 87 GT
Gold 86 SE (wrecked)
Red 84 2.5 Coupe
In the process of buying another 87 GT

Hmm yeah it might be the 3.2. I dident really look close at the car it came off.

Smallest V-6 to come in an Intrepid is the 2.7 dohc, but my intrepid has a single throttle body, must be the 3.2