Ok, so I am wondering exactly about how to lower the seats. I have been sitting in the car without the seats in there, and driving it like that is awesome. So i figured, might as well try and lower the seats as much as possible to get that feeling. Even if it is only half an inch.

Do you simply just hammer down around the area that the seats are on? Sometimes the simplest answer is the best

any ideas?

What if you took the rails off and just bolted them down?
I have my seats as far back as posible and dont ever adjust them.
It would require drilling holes and puting nuts on the studs, if they are even long enough.
Look for the stinger build up tread it shows how Archi lowered the seats.
Good luck and take pictures.

quote Originally posted by Jake_Dragon: What if you took the rails off and just bolted them down? I have my seats as far back as posible and dont ever adjust them. It would require drilling holes and puting nuts on the studs, if they are even long enough. Look for the stinger build up tread it shows how Archi lowered the seats. Good luck and take pictures.

Hey, I was actually thinking about removing the brakets, that would give me the perfect level that I want... but unfortunately I need the seat to move back and forth. I use it all the way back, but im not the only one who drives my car.

EDIT: I broke down and actually went and searched through all the pages.. If anyone else is interested in this, here is the link

//www.fiero.nl/forum/Forum1/HTML/013402-19.html

------------------

87 GT w/T-Tops
If you like what I am contributing, please vote.

[This message has been edited by soup (edited 02-29-2004).]