Pennock's Fiero Forum
  Technical Discussion & Questions - Archive
  Used Parts for Fiero from other GM cars.

T H I S   I S   A N   A R C H I V E D   T O P I C
  

Email This Page to Someone! | Printable Version


Used Parts for Fiero from other GM cars. by befarrer
Started on: 02-17-2004 02:41 PM
Replies: 4
Last post by: theogre on 02-18-2004 08:47 PM
befarrer
Member
Posts: 1962
From: Westlock, Alberta, CANADA
Registered: Aug 2002


Feedback score: N/A
Leave feedback





Total ratings: 61
Rate this member

Report this Post02-17-2004 02:41 PM Click Here to See the Profile for befarrerClick Here to Email befarrerSend a Private Message to befarrerDirect Link to This Post
I dont want to spend much money on the engine of my 1986 2.5 5-speed. The engine needs an engine mount, and an EGR valve, as far as I know. What other GM cars use the same engine mount? The EGR valve should be the same as any other GM car with the same VIN engine code. I dont know if the tranny mounts are good or not, but incase they are not, what cars have the same mounts?

Thanks

------------------

Details on my Fiero here
Member of the Edmonto Fiero Club Please rate me if I helped you!

IP: Logged
PFF
System Bot
NotAFieroAnyLonger
Member
Posts: 4413
From: 75762/Texas/USA
Registered: Dec 2003


Feedback score: N/A
Leave feedback





Total ratings: 255
Rate this member

Report this Post02-17-2004 03:15 PM Click Here to See the Profile for NotAFieroAnyLongerClick Here to Email NotAFieroAnyLongerSend a Private Message to NotAFieroAnyLongerDirect Link to This Post
http://www.fiero.nl/forum/Forum1/HTML/026186.html
These are upgrade's but, it might give you an idea of what car's share some parts...

------------------

AKA. "SmoothGT"....

Custom Built W I D E BODY~GT!!

"I would rather be hatefully remembered, then just forgotten!!"

IP: Logged
fierodustin_86
Member
Posts: 970
From: Joplin, Missouri
Registered: Aug 2002


Feedback score: N/A
Leave feedback

Rate this member

Report this Post02-17-2004 03:24 PM Click Here to See the Profile for fierodustin_86Click Here to Email fierodustin_86Send a Private Message to fierodustin_86Direct Link to This Post
Most usually they have the same part # for the part. That was my experience at O'reilly Auto. Besides the rear trans mount was only $7 and some change. Not too bad though.

------------------
86 Fiero SE
email: fierodustin@yahoo.com
PROJECT: 86 GT soon with a 3800SC

IP: Logged
fierosound
Member
Posts: 14442
From: Calgary, Canada
Registered: Nov 1999


Feedback score: N/A
Leave feedback





Total ratings: 279
Rate this member

Report this Post02-17-2004 10:30 PM Click Here to See the Profile for fierosoundClick Here to visit fierosound's HomePageClick Here to Email fierosoundSend a Private Message to fierosoundDirect Link to This Post
Get new mounts from Auto Value. You can get ALL 3 for less than the price of just the front one from GM.

------------------

3.4L S/C 87 GT www.fierosound.com
2002/2003 World of Wheels Winner &
Multiple IASCA Stereo Award Winner

IP: Logged
theogre
Member
Posts: 29321
From: USA
Registered: Mar 99


Feedback score: N/A
Leave feedback





Total ratings: 549
Rate this member

Report this Post02-18-2004 08:47 PM Click Here to See the Profile for theogreClick Here to visit theogre's HomePageSend a Private Message to theogreDirect Link to This Post
Any parts store has or can get the engine mount. Trans too usually.

read the mount article in my cave.

You don't want used engine mounts. many are liquid filled and they are usually shot. (sometimes they are bad new... read the cave article...)
The trans mounts are all likely to be pretty tore up as well.

------------------
Edison Carter: When did the News become Entertainment?
Murray: Since it was invented.

The Ogre's Fiero Cave (It's also at the top of every forum page...)

IP: Logged



All times are ET (US)

T H I S   I S   A N   A R C H I V E D   T O P I C
  

Contact Us | Back To Main Page

Advertizing on PFF | Fiero Parts Vendors
PFF Merchandise | Fiero Gallery | Ogre's Cave
Real-Time Chat | Fiero Related Auctions on eBay



Copyright (c) 1999, C. Pennock