I recently acquired a set of doors from an 86 that had power windows. I have an 85 SE with manual windows. Does anyone have the wiring diagrams for the power window circuit? just wondering, as the last time I was in the center console of my 85, I noticed two connectors that looked like they were for power windows, but I'm not sure if I have the rest of the harness (leading to the doors). That way, I can look at wiring them in myself & not have to worry about trying to get a harness at an auction site, or trying to find one at a scrap yard.
The wiring harness for the windows are a seperate feed that plugs into your harness . If you have that that connectors under your console will be big. Dont mistake them for the lights. I can scan you incopy of the wiring diagram but Id rather email it to you, because of the size versues clarity. here is a sample of it. john
[This message has been edited by fiero67 (edited 02-16-2004).]
IP: Logged
06:02 PM
hajii Member
Posts: 373 From: Creedmoor, NC USA Registered: Sep 2002
dk blue window control left front up brown......................................down dark blue/white...........right front up tan........................................down
PW feed..........pink PW ground.........black
[This message has been edited by fiero67 (edited 02-16-2004).]
IP: Logged
06:24 PM
GTDude Member
Posts: 9056 From: Keysville, Virginia, USA Registered: Nov 2001
Bad luck dude. 85 models were not prewired for pw. That means you're going to have to run all the wiring from the door....thru the rocker kick panel.......thru the dash and into the console. Not an easy job. Unfortunate that it's not an 86 cause they were prewired for pw. Good luck. fI've got a GM wiring schematic I can email if you need it. Let me know.
Phil
------------------ 87 FIERO GT 2.8 5spd
GM auto tech for 27 years. Specializing in electrical and computer problems. Now on workers comp. and it looks like I will be unable to return to work as a tech.
[This message has been edited by GTDude (edited 02-16-2004).]
IP: Logged
06:47 PM
Whuffo Member
Posts: 3000 From: San Jose, CA Registered: Jul 2003
Bad luck dude. 85 models were not prewired for pw. That means you're going to have to run all the wiring from the door....thru the rocker kick panel.......thru the dash and into the console. Not an easy job. Unfortunate that it's not an 86 cause they were prewired for pw. Good luck. fI've got a GM wiring schematic I can email if you need it. Let me know.
Phil
I was just working on the wiring in my 86 and it was -not- prewired for power windows. That's a separate harness...
IP: Logged
07:38 PM
jelly2m8 Member
Posts: 6275 From: Nova Scotia, Canada Registered: Jul 2001
Im doing the same thing on my 85 SE ....Do we need a relay?Would I be able to get the wiring info too?Please.... Also,I have powered the glass up and down by switching the wires back and forth so how does that work?Does the switch do that or is that the job of a relay?Can you explain this? Thanks....
------------------ GOD,Family and Cars...And in that order...
Putting power doors on was a much larger job than I had anticipated. Good luck and make sure you ground the passenger side ground real good or you'll run into weird problems.
------------------ Remanufactured 2.8 transplanted into 88 coupe, poly dogbone, poly/rebuilt suspension, customized interior, ported ex manifolds, ported TB and plenum, MSD coil, short shifter, body converted to Fastback, K&N filter, 17" Enkies, underdrive pulley, 1.6 roller rockers, straight pipe, ocelot exhaust, Nitrous Oxide, corvette tail lights, and more to come.
In the works.. Already in my possesion but not on my car: Aus Stage 3 Rear 1/4 scoops, new front brake calipers and Fiero Store Turbo 1/4 window Scoops with tinted windows.
IP: Logged
01:58 PM
Feb 19th, 2004
hajii Member
Posts: 373 From: Creedmoor, NC USA Registered: Sep 2002
ok...dumb question coming up...I noticed that when I got the doors, there were two connectors on the door; a big rectangular connector & a small rounded connector. I assume the big connector was for the windows, but what was the other connector for? the donor car did not have pwr locks or mirrors. If they are for the ajar switch, is it possible to modify the 86 harness to retrofit it into an 85 chassis?
I assume the small one is basically the door ajar switch.....as far as rewiring harnesses...Id ask Jelly...he is helping me with the rewire of my car and definately knows what he is talking about.
