Pennock's Fiero Forum
  Technical Discussion & Questions - Archive
  Steering Rack Problems

T H I S   I S   A N   A R C H I V E D   T O P I C
  

Email This Page to Someone! | Printable Version


Steering Rack Problems by blazin'
Started on: 01-21-2004 12:40 AM
Replies: 0
Last post by: blazin' on 01-21-2004 12:40 AM
blazin'
Member
Posts: 1294
From: Yorkton, SK
Registered: Oct 2001


Feedback score: N/A
Leave feedback

Rate this member

Report this Post01-21-2004 12:40 AM Click Here to See the Profile for blazin'Click Here to Email blazin'Send a Private Message to blazin'Direct Link to This Post
I'm having some real PITA problems with these stupid racks..... The one I took out, has about 1.5 cm of play on the driver's side (in the rack around the bellow) while installed. While off, the main shaft will move about half a centimeter in relation with the rack. The one I just put in had slight play, which I guess it should, but it felt really good and tight. After installed, that side still has as much play as before! Whats the deal? The inner tie rods are quite new and are tight.

Basically, my question is, besides the rack bushing, what goes wrong with these things?

IP: Logged
PFF
System Bot



All times are ET (US)

T H I S   I S   A N   A R C H I V E D   T O P I C
  

Contact Us | Back To Main Page

Advertizing on PFF | Fiero Parts Vendors
PFF Merchandise | Fiero Gallery | Ogre's Cave
Real-Time Chat | Fiero Related Auctions on eBay



Copyright (c) 1999, C. Pennock