Hey guys! I want to help out a friend swapp a 3800SC II in his 92-94 Cavalier Z24. I'm familiar with the Fiero Swap. Anything to look out for that would be different on the Z? he has a 2.8L or 3.1 now. the tranny is auto. I guess we will bolt it up to the same tranny or swapp in a tranny from a baretta 5spd.
Anyone have experience with this swap?
Posts: 4167 From: London, On., Canada Registered: Jan 2001
I have many pics of one done on a 94 and have searched the J/body forum and L67 swap forum on what is involved (more so for 95 and newer). Email me and I will forward on the pics. This swap too them moved the engine and trans over to allow room for the pullies.
Posts: 6258 From: Commerce Twp, MI, USA Registered: Jun 2002
No experience with the swap, but a forum one of my supervisors used to frequent when I was working for him in high performance vehicle operations was www.j-body.org Not sure if you've seen it yet or not, but may be a good place to start.
------------------ '87 Fiero GT: Northstar, Getrag, TGP wheels, rear sway bar, rod end links, bushings, etc. '90 Pontiac 6000 SE AWD: Leaking ABS unit fixed, load levelling rear suspension fixed, still slow