Pennock's Fiero Forum
  Technical Discussion & Questions - Archive
  Antifreeze in the motor- 3.1 or 3.4 ???

T H I S   I S   A N   A R C H I V E D   T O P I C
  
Email This Page to Someone! | Printable Version
Antifreeze in the motor- 3.1 or 3.4 ??? by dclink
Started on: 10-17-2003 10:17 PM
Replies: 1
Last post by: Jim Baumann on 10-18-2003 04:49 AM
dclink
Member
Posts: 109
From: Fremont
Registered: Jul 2003

Feedback score: N/A
Leave feedback

Rate this member
Report this Post10-17-2003 10:17 PM Click Here to See the Profile for dclinkClick Here to visit dclink's HomePageSend a Private Message to dclinkDirect Link to This Post
My dream to drive the 86 GT is going to have to wait a bit longer. After working like a dog on the 2.8 I have been told it has low to no compression in a few cylinders and antifreeze in the motor.

I am thinking a 3.1 or a 3.4 junkyard motor.

Can anyone give me a web site for all the info needed??

IP: Logged
PFF
System Bot
Jim Baumann
Member
Posts: 159
From: Honolulu, Hi
Registered: Oct 1999

Feedback score: N/A
Leave feedback

Rate this member
Report this Post10-18-2003 04:49 AM Click Here to See the Profile for Jim BaumannSend a Private Message to Jim BaumannDirect Link to This Post
I threw a rod in my 2.8 and have started to replace it with a 3.4. Here are the best links to help with this conversion that I have found: http://www.crazydave.org/fiero34project
and http://welcome.to/thefierofactory
Crazy Dave also links to several sites that sell some required/suggested parts.

Good Luck

IP: Logged



All times are ET (US)

T H I S   I S   A N   A R C H I V E D   T O P I C
  

Contact Us | Back To Main Page

Advertizing on PFF | Fiero Parts Vendors
PFF Merchandise | Fiero Gallery | Ogre's Cave
Real-Time Chat | Fiero Related Auctions on eBay



 Copyright (c) 1999, C. Pennock