Just like it says, Will 17x7.5 with 45mm offset work on a 1.5" drop stock suspension?
Will the offset be a problem and how to resolve this? Maybe spacers?

Thanks for your help,
Jesse

------------------

Same combo I have, no problems.

------------------

Patrick Szewczyk
1987 Fiero GT, 5 spd, sunroof CDF clutch, Koni's all around, Ground Control coilovers in the rear, lowered 2" -dropped spindles-front, poly bushings: control arms-sway bars-cradle-motor-dogbone, rear sway bar, pioneer cd player, 180 stat, 176-166 fan switch, MSD Coil, Rodney Dickman's short shifter, bushings, etc..., 11.25" big brakes w/Ebrake, k&n filter, I have a 3800SC SII that's goin in soon w/ 3.25 pulley, comp cams vs cam, ported heads, haltech engine mngmnt, WCF headers, stainless exhaust, + 17x7.5 MiM Venezias wheels + 225/45/17 and 235/40/17's ---------------Also have a 1996 3800 Series II 25k MOTOR FOR SALE.

No coilovers, but hope to very soon!

Here are the ones I got. I got these for $300 with about 60% or 70% tread left on the tires.

------------------

man i need to find some 15" wheels that are cheap and look good. my stock 86 gt's are coroded and leak air

------------------
'86 Fiero GT

www.KylesFiero.tk

I will be selling the ones off my car if you want to make an offer. They have four decent tires with plenty of tread still on them. But they are dry rotting. The rims are VERY clean. And to make things better for you. Either this weekend or next or maybe the next I will be going down to Atlanta by hwy 85 to pick these up if we make a deal I can meet you some where along the way.

LMK
Jesse

hey taurusthug u can send them off to be refinished and sealed back up it only cost about 50 bucks a rim not cheap but u get to keep ur oem rims and make them look like new...