Pennock's Fiero Forum
  Technical Discussion & Questions - Archive
  Dash corner Repairs made easy & cheap

T H I S   I S   A N   A R C H I V E D   T O P I C
  

Email This Page to Someone! | Printable Version


Dash corner Repairs made easy & cheap by fierodave
Started on: 10-09-2000 02:58 AM
Replies: 2
Last post by: sdm1964 on 10-09-2000 06:55 AM
fierodave
Member
Posts: 1877
From: Mosinee, Wi. 54455
Registered: Sep 99


Feedback score: N/A
Leave feedback

Rate this member

Report this Post10-09-2000 02:58 AM Click Here to See the Profile for fierodaveClick Here to visit fierodave's HomePageDirect Link to This Post

Hello all Been under the weather as of late, thanks for all the email with your prayers!

I can no longer offer the headliner & dash corner repairs I have been doing due to my illness so i'll pass along a few tips to you all!

I have had some x-lint results using Napa's Flex-bumper repair kits for my dash corner resto's, it feathers into the dash perfectly, and is as flexible as the dash corners.

Cut out the damaged area, 36 grit the dash 1/2" around area to repair and make a masking tape bridge to dam the mixed repair compond (it flows a little so the dam is needed)
Then finish the repair as the directions on the kit state.

The kit is Napa's Flex repair kit part No.765-1540
It retails around $26.00 and one kit has done over 10 dash restos!

For the guys in the body shop trade this kit is made for Napa BY Marson
It's a great product and you will have super results.
If you need more details just give me a call, No emails Please or post it here I'll try to keep an eye open for it lol
FD

------------------

[This message has been edited by fierodave (edited 10-09-2000).]

IP: Logged
PFF
System Bot
862M4inCA
Member
Posts: 1133
From: Bakersfield, CA
Registered: Dec 1999


Feedback score: N/A
Leave feedback

Rate this member

Report this Post10-09-2000 06:06 AM Click Here to See the Profile for 862M4inCASend a Private Message to 862M4inCADirect Link to This Post
I would definately be interested in getting more information on this. My dash is in perfect condition aside from some cracking on the corners by each door. Any help/tips are greatly appreciated.
IP: Logged
sdm1964
Member
Posts: 315
From: Glennville, Ga, usa
Registered: Oct 1999


Feedback score: N/A
Leave feedback

Rate this member

Report this Post10-09-2000 06:55 AM Click Here to See the Profile for sdm1964Send a Private Message to sdm1964Direct Link to This Post
Do you have to repaint the whole dash or just the repair?
IP: Logged



All times are ET (US)

T H I S   I S   A N   A R C H I V E D   T O P I C
  

Contact Us | Back To Main Page

Advertizing on PFF | Fiero Parts Vendors
PFF Merchandise | Fiero Gallery
Real-Time Chat | Fiero Related Auctions on eBay



Copyright (c) 1999, C. Pennock