88 duke. Where to get hose from thermostat housing to coolant pipe?
Topic started by: ltlfrari, Date: 08-04-2010 01:38 PM
Original thread: http://www.fiero.nl/forum/Archive-000001/HTML/20120111-2-110554.html

ltlfrari (dave_ellis_@hotmail.com) MSG #1, 08-04-2010 01:38 PM
      The hose from the T stat housing that goes to the coolant pipe on the drivers side of my 88 duke has developed a hole (or three).
I looked in the Fierostore but could not see anything that looked like the correct pipe, also tried rock auto and napa online with no joy.

Anyone any ideas as to where I can get a new hose from or is it going to be a case of pull the hose and dig around the local auto shops shelves for something similar?

jaskispyder MSG #2, 08-04-2010 01:45 PM
      Is this the part? http://www.fierostore.com/P...px?s=52321&d=149&p=1

The description doesn't say for what engine this is used on.

jetman (dangerkitty@wideopenwest.com) MSG #3, 08-04-2010 02:44 PM
      Here is a chart that may help....

I didn't see the hose listed at the Fiero Store.

ltlfrari (dave_ellis_@hotmail.com) MSG #4, 08-04-2010 02:45 PM
      I might be, not very clear from the description. Guess I'll have to call them.


ltlfrari (dave_ellis_@hotmail.com) MSG #5, 08-04-2010 09:22 PM
      Looks like it's discontinued. Time to go searching for something to make a replacement out of