How to remove inner door panels, with pics. (Page 3/4)
IMSA GT JUL 05, 10:39 PM

quote
Originally posted by kendallville:


Stupid question how do you put that back on?



Simply snap the clip back in as seen in the picture and then press the crank back on the door. It will snap into place.
PacNWFiero MAR 23, 08:58 PM
Does anyone know if this way of taking the door apart lets you replace the interior door handle?

I have an interior handle on the driver's side that recently snapped in half and I am looking to replace it.
notwohorns MAR 26, 11:37 AM
yes, you get to the inner door handle while the inner door panel is off. If I remember right the inner door handle is held on with rivets
SamanthaM FEB 03, 03:00 PM
I just started the tedious job of replacing the outer dew strip on my 86 Fiero. I am positive it has never been torn apart before as some of the plastic christmas trees broke off :-(
Does anyone know where you can get the right style of replacement? And, how do you get them to stay in the pre-cut hole they mount in on the interior door panel itself? I was thinking of glue to help hold them in place?

Also, the passenger mirror was not mounted on the car and the blots that hold it on are also not with the car. Does anyone know the specific size they are so I can go buy them?

Thanks in advance.
IMSA GT FEB 06, 10:06 PM

quote
Originally posted by SamanthaM:

I just started the tedious job of replacing the outer dew strip on my 86 Fiero. I am positive it has never been torn apart before as some of the plastic christmas trees broke off :-(
Does anyone know where you can get the right style of replacement? And, how do you get them to stay in the pre-cut hole they mount in on the interior door panel itself? I was thinking of glue to help hold them in place?

Also, the passenger mirror was not mounted on the car and the blots that hold it on are also not with the car. Does anyone know the specific size they are so I can go buy them?

Thanks in advance.



Fierostore has the fasteners. They are supposed to twist into the door panel and lock in place.
https://www.fierostore.com/...px?s=80382&d=308&p=1

As for the mirror, I thought it has studs with nuts. I have not seen one with bolts. If you need the nuts:
https://www.fierostore.com/...88105&nq=0&d=190&p=1

[This message has been edited by IMSA GT (edited 02-06-2020).]

SamanthaM FEB 13, 08:35 AM

quote
Originally posted by IMSA GT:


Fierostore has the fasteners. They are supposed to twist into the door panel and lock in place.
https://www.fierostore.com/...px?s=80382&d=308&p=1

As for the mirror, I thought it has studs with nuts. I have not seen one with bolts. If you need the nuts:
https://www.fierostore.com/...88105&nq=0&d=190&p=1




Thank you. I ordered some things from Rodney Dickman so I added some new christmas trees to my order. The temps took a dump here in Ohio so I have suspended my work on the dew strips until I can feel my fingers again!

As for the mirror.... Now I see why it was just sitting in the trunk. I guess I am going to have to order some missing parts to be able to reattach it to the car.
SamanthaM MAR 07, 03:27 PM
Well, after looking at a picture online, it seems the studs are not on the passenger mirror.... :-( So, is it possible to just fix this one or do I need to try and find a replacement?
IMSA GT MAR 09, 07:21 PM

quote
Originally posted by SamanthaM:

Well, after looking at a picture online, it seems the studs are not on the passenger mirror.... :-( So, is it possible to just fix this one or do I need to try and find a replacement?



I just went out and removed the stud from my mirror. I assume your mirror is simply missing the bolts....or are they broken off? Here is what they should look like:




I need to post a thread in General about this. I believe they are 6mm but I don't know the thread spacing.
SamanthaM MAR 13, 01:37 PM

quote
Originally posted by IMSA GT:


I just went out and removed the stud from my mirror. I assume your mirror is simply missing the bolts....or are they broken off?

I need to post a thread in General about this. I believe they are 6mm but I don't know the thread spacing.



They are missing on mine. Thank you so much, this is extremely helpful! I will head to the hardware store today or tomorrow and see if I can get two new ones!
SamanthaM MAR 24, 01:10 PM
I did finally get the studs out of the Fiero I am gutting in the field and mounted the passenger mirror. Thank you guys for this great article and all your help!