I still have some parts left over from parting out my Fiero. In this post, I'll be listing a bunch of engine related stuff. My Fiero had a 3.4 V6, but these parts will also fit the 2.8 and 3.1 V6 with iron heads. All these parts are used but in good condition. But since they're used, I'm selling them "as is".

Here's the list:

Alternator Bracket -- This is the beefed-up alternator bracket from the Fiero Store. The stock bracket tends to crack in the slotted area. This one won't. These cost $44.95 new.
Asking price is $30 plus shipping




Dogbone Bracket -- This is the 2-piece bracket on top of the cylinder head, that the dogbone attaches to. This is a stock part. Includes both pieces.
Asking price is $20 plus shipping -- SOLD!




Adjustable Dogbone -- From Rodney Dickman, with urethane bushings. These cost $64.95 new.
Asking price is $40 plus shipping -- SOLD!




Lower Engine Mount ('85-87) -- From Rodney Dickman, with urethane bushing. This mount fits the '85-87 V6. These cost $84.95 new.
Asking price is $55 plus shipping -- SOLD!




Lower Engine Mount ('88) -- From Rodney Dickman, with urethane bushing. This mount fits the '88 V6. These cost $84.95 new.
Asking price is $55 plus shipping -- SOLD!




Front Transmission Mount -- From Rodney Dickman, with urethane bushing. This fits the automatic and manual transmission that use two tranny mounts, will NOT fit the ones that use a single tranny mount. These cost $89.95 new.
Asking price is $55 plus shipping -- SOLD!




Rear Transmission Mount -- From Rodney Dickman, with urethane bushing. This fits the automatic and manual transmission that use two tranny mounts, will NOT fit the ones that use a single tranny mount. These cost $89.95 new.
Asking price is $55 plus shipping -- SOLD!




Underdrive Pulley (aka Power Pulley) -- From Rodney Dickman, includes mounting bolts. This pulley will under-drive the accessories by about 30%. These cost $43.99 new.
Asking price is $30 plus shipping -- SOLD!




Belt Tensioner Bracket -- From Dodgerunner, allows you to use a spring-loaded belt tensioner on your Fiero. You can grab a tensioner from a 3100 or 3400 V6 in the junkyard, or I can toss in my old tensioner for an extra $5.
Asking price is $30 plus shipping (add $5 for the tensioner) -- SOLD!




Gear Reduction Starter -- This is the 1.7kW version, which IIRC is the highest power starter of this type. I bought it new for $79. Here's a YouTube video comparing the stock vs gear reduction starter: https://www.youtube.com/watch?v=npMMqJsSdGM
Asking price is $35 plus shipping -- SOLD!




Aluminum Flywheel -- Made by Fidanza. Only weighs 8 pounds. This will only fit a V6 with an internally balanced crankshaft (i.e. the '88 2.8, or any 3.1 / 3.4 V6). This flywheel will NOT work with the pre-88 V6. These cost about $380 new. NOTE: I'm including a set of SAE Grade 8 washers with the flywheel. You need to install these washers on the flywheel bolts, to securely mount the flywheel.
Asking price is $265 $250 plus shipping




If you'd like to buy an item, or have a question, you can send me a PM or send an email to m.blacktree@gmail.com . I accept Paypal, Zelle, and postal money orders as payment. Shipping will be US Priority Mail, unless you specifically request something else. If you buy multiple items, I will combine shipping. At this time, I am not willing to ship outside the USA.

Thanks for watching!

[This message has been edited by Blacktree (edited 06-27-2020).]

[This message has been edited by Blacktree (edited 06-04-2020).]

[This message has been edited by Blacktree (edited 06-08-2020).]

[This message has been edited by Blacktree (edited 06-15-2020).]